lkml.org 
[lkml]   [2022]   [Jul]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 net-next 0/2] macb: add zynqmp SGMII dynamic configuration support
Date
This patchset add firmware and driver support to do SD/GEM dynamic
configuration. In traditional flow GEM secure space configuration
is done by FSBL. However in specific usescases like dynamic designs
where GEM is not enabled in base vivado design, FSBL skips GEM
initialization and we need a mechanism to configure GEM secure space
in linux space at runtime.


Changes for v2:
- Add phy_exit() in error return paths.
- Use tab indent for zynqmp_pm_set_sd/gem_config return documentation.

Radhey Shyam Pandey (1):
net: macb: Add zynqmp SGMII dynamic configuration support

Ronak Jain (1):
firmware: xilinx: add support for sd/gem config

drivers/firmware/xilinx/zynqmp.c | 31 ++++++++++++++++++++++++++++++
drivers/net/ethernet/cadence/macb_main.c | 25 ++++++++++++++++++++++++
include/linux/firmware/xlnx-zynqmp.h | 33 ++++++++++++++++++++++++++++++++
3 files changed, 89 insertions(+)

--
2.1.1

\
 
 \ /
  Last update: 2022-07-29 21:37    [W:0.535 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site