lkml.org 
[lkml]   [2022]   [Jul]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [GIT PULL] thermal for v5.20-rc1
On Fri, Jul 29, 2022 at 6:47 PM Daniel Lezcano
<daniel.lezcano@linaro.org> wrote:
>
>
> Hi Rafael,
>
> please consider pulling the following changes:
>
> Thanks!
>
>
> The following changes since commit 62f46fc7b8c639bc97cc9c69e063c40970b6e14c:
>
> thermal: intel_tcc_cooling: Add TCC cooling support for RaptorLake
> (2022-06-30 19:48:44 +0200)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git
> tags/thermal-v5.20-rc1
>
> for you to fetch changes up to d0c75fa2c17f082b32a5f26ff40bf378b12952de:
>
> thermal/of: Initialize trip points separately (2022-07-28 17:29:57 +0200)
>
> ----------------------------------------------------------------
> - Make per cpufreq / devfreq cooling device ops instead of using a
> global variable, fix comments and rework the trace information
> (Lukasz Luba)
>
> - Add the include/dt-bindings/thermal.h under the area covered by the
> thermal maintainer in the MAINTAINERS file (Lukas Bulwahn)
>
> - Improve the error output by giving the sensor identification when a
> thermal zone failed to initialize, the DT bindings by changing the
> positive logic and adding the r8a779f0 support on the rcar3 (Wolfram
> Sang)
>
> - Convert the QCom tsens DT binding to the dtsformat format (Krzysztof
> Kozlowski)
>
> - Remove the pointless get_trend() function in the QCom, Ux500 and
> tegra thermal drivers, along with the unused DROP_FULL and
> RAISE_FULL trends definitions. Simplify the code by using clamp()
> macros (Daniel Lezcano)
>
> - Fix ref_table memory leak at probe time on the k3_j72xx bandgap
> (Bryan Brattlof)
>
> - Fix array underflow in prep_lookup_table (Dan Carpenter)
>
> - Add static annotation to the k3_j72xx_bandgap_j7* data structure
> (Jin Xiaoyun)
>
> - Fix typos in comments detected on sun8i by Coccinelle (Julia Lawall)
>
> - Fix typos in comments on rzg2l (Biju Das)
>
> - Remove as unnecessary call to dev_err() as the error is already
> printed by the failing function on u8500 (Yang Li)
>
> - Register the thermal zones as hwmon sensors for the Qcom thermal
> sensors (Dmitry Baryshkov)
>
> - Fix 'tmon' tool compilation issue by adding phtread.h include
> (Markus Mayer)
>
> - Fix typo in the comments for the 'tmon' tool (Slark Xiao)
>
> - Consolidate the thermal core code by beginning to move the thermal
> trip structure from the thermal OF code as a generic structure to be
> used by the different sensors when registering a thermal zone
> (Daniel Lezcano)
>
> ----------------------------------------------------------------
> Biju Das (1):
> thermal/drivers/rzg2l: Fix comments
>
> Bryan Brattlof (1):
> thermal/drivers/k3_j72xx_bandgap: Fix ref_table memory leak
> during probe
>
> Dan Carpenter (1):
> thermal/drivers/k3_j72xx_bandgap: Fix array underflow in
> prep_lookup_table()
>
> Daniel Lezcano (16):
> thermal/drivers/qcom: Remove get_trend function
> thermal/drivers/tegra: Remove get_trend function
> thermal/drivers/u8500: Remove the get_trend function
> thermal/core: Use clamp() helper in the stepwise governor
> thermal/core: Remove DROP_FULL and RAISE_FULL
> thermal/core: Avoid calling ->get_trip_temp() unnecessarily
> thermal/core: Remove duplicate information when an error occurs
> thermal/of: Replace device node match with device node search
> thermal/of: Remove the device node pointer for thermal_trip
> thermal/of: Move thermal_trip structure to thermal.h
> thermal/core: Remove unneeded EXPORT_SYMBOLS
> thermal/core: Move thermal_set_delay_jiffies to static
> thermal/core: Rename 'trips' to 'num_trips'
> thermal/core: Add thermal_trip in thermal_zone
> thermal/of: Use thermal trips stored in the thermal zone
> thermal/of: Initialize trip points separately
>
> Dmitry Baryshkov (2):
> thermal/drivers/qcom/temp-alarm: Register thermal zones as hwmon
> sensors
> thermal/drivers/qcom/spmi-adc-tm5: Register thermal zones as
> hwmon sensors
>
> Jason Wang (1):
> thermal/ti-soc-thermal: Fix comment typo
>
> Jin Xiaoyun (1):
> thermal/drivers/k3_j72xx_bandgap: Make
> k3_j72xx_bandgap_j721e_data and k3_j72xx_bandgap_j7200_data static
>
> Julia Lawall (1):
> thermal/drivers/sun8i: Fix typo in comment
>
> Krzysztof Kozlowski (1):
> dt-bindings: thermal: qcom,spmi-temp-alarm: convert to dtschema
>
> Lukas Bulwahn (1):
> MAINTAINERS: add include/dt-bindings/thermal to THERMAL
>
> Lukasz Luba (4):
> drivers/thermal/cpufreq_cooling: Use private callback ops for
> each cooling device
> drivers/thermal/cpufreq_cooling : Refactor
> thermal_power_cpu_get_power tracing
> drivers/thermal/cpufreq_cooling: Update outdated comments
> drivers/thermal/devfreq_cooling: Extend the
> devfreq_cooling_device with ops
>
> Markus Mayer (1):
> thermal/tools/tmon: Include pthread and time headers in tmon.h
>
> Slark Xiao (1):
> thermal/tools/tmon: Fix typo 'the the' in comment
>
> Wolfram Sang (3):
> drivers/thermal/rcar_gen3_thermal: Improve logging during probe
> dt-bindings: thermal: rcar-gen3-thermal: use positive logic
> dt-bindings: thermal: rcar-gen3-thermal: Add r8a779f0 support
>
> Yang Li (1):
> thermal/drivers/u8500: Remove unnecessary print function dev_err()
>
> .../bindings/thermal/qcom,spmi-temp-alarm.yaml | 85 +++++++++
> .../bindings/thermal/qcom-spmi-temp-alarm.txt | 51 ------
> .../bindings/thermal/rcar-gen3-thermal.yaml | 36 ++--
> MAINTAINERS | 1 +
> drivers/thermal/cpufreq_cooling.c | 77 +++-----
> drivers/thermal/db8500_thermal.c | 34 +---
> drivers/thermal/devfreq_cooling.c | 27 +--
> drivers/thermal/gov_fair_share.c | 6 +-
> drivers/thermal/gov_power_allocator.c | 4 +-
> drivers/thermal/gov_step_wise.c | 26 +--
> drivers/thermal/k3_j72xx_bandgap.c | 13 +-
> drivers/thermal/qcom/qcom-spmi-adc-tm5.c | 5 +
> drivers/thermal/qcom/qcom-spmi-temp-alarm.c | 5 +
> drivers/thermal/qcom/tsens.c | 12 --
> drivers/thermal/qcom/tsens.h | 2 -
> drivers/thermal/rcar_gen3_thermal.c | 4 +-
> drivers/thermal/rzg2l_thermal.c | 18 +-
> drivers/thermal/sun8i_thermal.c | 2 +-
> drivers/thermal/tegra/soctherm.c | 32 ----
> drivers/thermal/tegra/tegra30-tsensor.c | 2 +-
> drivers/thermal/thermal_core.c | 61 ++++---
> drivers/thermal/thermal_core.h | 15 --
> drivers/thermal/thermal_helpers.c | 13 +-
> drivers/thermal/thermal_netlink.c | 2 +-
> drivers/thermal/thermal_of.c | 201
> ++++++++++++---------
> drivers/thermal/thermal_sysfs.c | 22 +--
> drivers/thermal/ti-soc-thermal/ti-bandgap.c | 2 +-
> include/linux/thermal.h | 26 ++-
> include/trace/events/thermal.h | 28 +--
> tools/thermal/tmon/pid.c | 2 +-
> tools/thermal/tmon/tmon.h | 3 +
> 31 files changed, 387 insertions(+), 430 deletions(-)
> create mode 100644
> Documentation/devicetree/bindings/thermal/qcom,spmi-temp-alarm.yaml
> delete mode 100644
> Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt
>
> --

Pulled, thanks!

\
 
 \ /
  Last update: 2022-07-29 19:14    [W:0.033 / U:1.460 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site