lkml.org 
[lkml]   [2022]   [Jul]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] USB: usb-serial-simple: add new device id for OPPO R11
On Fri, Jul 29, 2022 at 02:13:56PM +0800, sdlyyxy wrote:
>
> > On Jul 24, 2022, at 22:26, Johan Hovold <johan@kernel.org> wrote:
> >
> > On Sun, Jul 24, 2022 at 04:00:36PM +0200, Greg Kroah-Hartman wrote:
> >> On Sat, Jul 23, 2022 at 06:36:25PM +0200, Johan Hovold wrote:
> >>> On Mon, Jul 18, 2022 at 10:47:24PM +0200, Reinhard Speyerer wrote:
> >
> >>>> Please don't give the OPPO R11 diag port on Linux a bad name by letting
> >>>> the usb-serial-simple driver handle it.
> >>>
> >>> So while I'm not sure bandwidth is really a problem, I still tend to
> >>> agree that we should add this one to the option driver for now as that
> >>> is how we handle (non-GOBI) Qualcomm modems and their QCDM ports.
> >>
> >> If you want it to stay on the option driver, that's fine, but I still
> >> think it feels odd as it obviously does not follow the vendor-specific
> >> protocol that the option driver supports.
> >
> > But we've been dumping modem device-id entries in there since forever.
> >
> > The entries added to option have been for devices whose interfaces did
> > not follow any particular pattern (e.g. unlike the old GOBI modems).
> >
> > And as Reinhard mentioned, the line-control requests (which follow CDC)
> > are actually required by some Qualcomm modems so moving things out would
> > need to be done carefully.
> >
> > On the other hand, that request likely isn't needed for any QCDM/DIAG
> > ports, but who knows for sure.
>
> Test result for bandwidth problem:
> Sending 0x1f mask (diag command: 0x7d0500001f000000) and running LTE
> speedtest on the device, both option and simple can dump more than 80Mbps.
> The CRC of diag packets is OK at this high speed, so it seems that
> there is no message loss. I think this bandwidth is enough.
>
> For the flow control problem, it seems the SetControlLineState request
> send by option (usb_wwan) has no effect on the device. Both with and
> without this request the diag port works the same.
>
> Hope this can help you decide which driver to choose :)

Thanks a lot for confirming! I'll try to revisit this next week and get
something merged for 5.20-rcN.

Johan

\
 
 \ /
  Last update: 2022-07-29 08:38    [W:0.127 / U:0.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site