lkml.org 
[lkml]   [2022]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.14 35/37] PCI: hv: Fix hv_arch_irq_unmask() for multi-MSI
Date
From: Jeffrey Hugo <quic_jhugo@quicinc.com>

commit 455880dfe292a2bdd3b4ad6a107299fce610e64b upstream.

In the multi-MSI case, hv_arch_irq_unmask() will only operate on the first
MSI of the N allocated. This is because only the first msi_desc is cached
and it is shared by all the MSIs of the multi-MSI block. This means that
hv_arch_irq_unmask() gets the correct address, but the wrong data (always
0).

This can break MSIs.

Lets assume MSI0 is vector 34 on CPU0, and MSI1 is vector 33 on CPU0.

hv_arch_irq_unmask() is called on MSI0. It uses a hypercall to configure
the MSI address and data (0) to vector 34 of CPU0. This is correct. Then
hv_arch_irq_unmask is called on MSI1. It uses another hypercall to
configure the MSI address and data (0) to vector 33 of CPU0. This is
wrong, and results in both MSI0 and MSI1 being routed to vector 33. Linux
will observe extra instances of MSI1 and no instances of MSI0 despite the
endpoint device behaving correctly.

For the multi-MSI case, we need unique address and data info for each MSI,
but the cached msi_desc does not provide that. However, that information
can be gotten from the int_desc cached in the chip_data by
compose_msi_msg(). Fix the multi-MSI case to use that cached information
instead. Since hv_set_msi_entry_from_desc() is no longer applicable,
remove it.

4.14 backport - moved to host/pci-hyperv.c. hv_set_msi_entry_from_desc
doesn't exist to be removed. int_entry replaces msi_entry for location
int_desc is written to.

Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1651068453-29588-1-git-send-email-quic_jhugo@quicinc.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/host/pci-hyperv.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/pci/host/pci-hyperv.c
+++ b/drivers/pci/host/pci-hyperv.c
@@ -938,6 +938,7 @@ static void hv_irq_unmask(struct irq_dat
struct msi_desc *msi_desc = irq_data_get_msi_desc(data);
struct irq_cfg *cfg = irqd_cfg(data);
struct retarget_msi_interrupt *params;
+ struct tran_int_desc *int_desc;
struct hv_pcibus_device *hbus;
struct cpumask *dest;
struct pci_bus *pbus;
@@ -952,6 +953,7 @@ static void hv_irq_unmask(struct irq_dat
pdev = msi_desc_to_pci_dev(msi_desc);
pbus = pdev->bus;
hbus = container_of(pbus->sysdata, struct hv_pcibus_device, sysdata);
+ int_desc = data->chip_data;

spin_lock_irqsave(&hbus->retarget_msi_interrupt_lock, flags);

@@ -959,8 +961,8 @@ static void hv_irq_unmask(struct irq_dat
memset(params, 0, sizeof(*params));
params->partition_id = HV_PARTITION_ID_SELF;
params->int_entry.source = 1; /* MSI(-X) */
- params->int_entry.address = msi_desc->msg.address_lo;
- params->int_entry.data = msi_desc->msg.data;
+ params->int_entry.address = int_desc->address & 0xffffffff;
+ params->int_entry.data = int_desc->data;
params->device_id = (hbus->hdev->dev_instance.b[5] << 24) |
(hbus->hdev->dev_instance.b[4] << 16) |
(hbus->hdev->dev_instance.b[7] << 8) |

\
 
 \ /
  Last update: 2022-07-27 18:30    [W:0.582 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site