lkml.org 
[lkml]   [2022]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] hwmon: (aquacomputer_d5next) Add support for Aquacomputer Quadro fan controller
Date
Extend aquacomputer_d5next driver to expose hardware temperature sensors
and fans of the Aquacomputer Quadro fan controller, which communicates
through a proprietary USB HID protocol. Implemented by Jack Doan [1].

Four temperature sensors and PWM controllable fans are available. The
liquid flow sensor is also exposed, implemented by Leonard Anderweit [2].

Additionally, serial number, firmware version and power-on count are
exposed through debugfs.

This driver has been tested on x86_64.

[1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/5
[2] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/9

Originally-from: Jack Doan <me@jackdoan.com>
Originally-from: Leonard Anderweit <leonard.anderweit@gmail.com>
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
---
Documentation/hwmon/aquacomputer_d5next.rst | 17 +++--
drivers/hwmon/Kconfig | 6 +-
drivers/hwmon/aquacomputer_d5next.c | 69 +++++++++++++++++++--
3 files changed, 78 insertions(+), 14 deletions(-)

diff --git a/Documentation/hwmon/aquacomputer_d5next.rst b/Documentation/hwmon/aquacomputer_d5next.rst
index 717e28226cde..33649a1e3a05 100644
--- a/Documentation/hwmon/aquacomputer_d5next.rst
+++ b/Documentation/hwmon/aquacomputer_d5next.rst
@@ -9,6 +9,7 @@ Supported devices:
* Aquacomputer Farbwerk RGB controller
* Aquacomputer Farbwerk 360 RGB controller
* Aquacomputer Octo fan controller
+* Aquacomputer Quadro fan controller

Author: Aleksa Savic

@@ -33,6 +34,9 @@ better suited for userspace tools.
The Octo exposes four temperature sensors and eight PWM controllable fans, along
with their speed (in RPM), power, voltage and current.

+The Quadro exposes four temperature sensors, a flow sensor and four PWM controllable
+fans, along with their speed (in RPM), power, voltage and current.
+
The Farbwerk and Farbwerk 360 expose four temperature sensors. Depending on the device,
not all sysfs and debugfs entries will be available.

@@ -45,13 +49,14 @@ the kernel and supports hotswapping.
Sysfs entries
-------------

-================ =============================================
+================ ==============================================
temp[1-4]_input Temperature sensors (in millidegrees Celsius)
-fan[1-2]_input Pump/fan speed (in RPM)
-power[1-2]_input Pump/fan power (in micro Watts)
-in[0-2]_input Pump/fan voltage (in milli Volts)
-curr[1-2]_input Pump/fan current (in milli Amperes)
-================ =============================================
+fan[1-8]_input Pump/fan speed (in RPM) / Flow speed (in dL/h)
+power[1-8]_input Pump/fan power (in micro Watts)
+in[0-7]_input Pump/fan voltage (in milli Volts)
+curr[1-8]_input Pump/fan current (in milli Amperes)
+pwm[1-8] Fan PWM (0 - 255)
+================ ==============================================

Debugfs entries
---------------
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index fd2446cf343b..e70d9614bec2 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -257,13 +257,13 @@ config SENSORS_AHT10
will be called aht10.

config SENSORS_AQUACOMPUTER_D5NEXT
- tristate "Aquacomputer D5 Next, Octo, Farbwerk, and Farbwerk 360"
+ tristate "Aquacomputer D5 Next, Octo, Quadro, Farbwerk, and Farbwerk 360"
depends on USB_HID
select CRC16
help
If you say yes here you get support for sensors and fans of
- the Aquacomputer D5 Next watercooling pump, Octo fan
- controller, Farbwerk and Farbwerk 360 RGB controllers, where
+ the Aquacomputer D5 Next watercooling pump, Octo and Quadro fan
+ controllers, Farbwerk and Farbwerk 360 RGB controllers, where
available.

This driver can also be built as a module. If so, the module
diff --git a/drivers/hwmon/aquacomputer_d5next.c b/drivers/hwmon/aquacomputer_d5next.c
index 738a1df8eae6..66430553cc45 100644
--- a/drivers/hwmon/aquacomputer_d5next.c
+++ b/drivers/hwmon/aquacomputer_d5next.c
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * hwmon driver for Aquacomputer devices (D5 Next, Farbwerk, Farbwerk 360, Octo)
+ * hwmon driver for Aquacomputer devices (D5 Next, Farbwerk, Farbwerk 360, Octo,
+ * Quadro)
*
* Aquacomputer devices send HID reports (with ID 0x01) every second to report
* sensor values.
@@ -21,17 +22,19 @@

#define USB_VENDOR_ID_AQUACOMPUTER 0x0c70
#define USB_PRODUCT_ID_FARBWERK 0xf00a
+#define USB_PRODUCT_ID_QUADRO 0xf00d
#define USB_PRODUCT_ID_D5NEXT 0xf00e
#define USB_PRODUCT_ID_FARBWERK360 0xf010
#define USB_PRODUCT_ID_OCTO 0xf011

-enum kinds { d5next, farbwerk, farbwerk360, octo };
+enum kinds { d5next, farbwerk, farbwerk360, octo, quadro };

static const char *const aqc_device_names[] = {
[d5next] = "d5next",
[farbwerk] = "farbwerk",
[farbwerk360] = "farbwerk360",
- [octo] = "octo"
+ [octo] = "octo",
+ [quadro] = "quadro"
};

#define DRIVER_NAME "aquacomputer_d5next"
@@ -97,6 +100,18 @@ static u8 octo_sensor_fan_offsets[] = { 0x7D, 0x8A, 0x97, 0xA4, 0xB1, 0xBE, 0xCB
/* Fan speed registers in Octo control report (from 0-100%) */
static u16 octo_ctrl_fan_offsets[] = { 0x5B, 0xB0, 0x105, 0x15A, 0x1AF, 0x204, 0x259, 0x2AE };

+/* Register offsets for the Quadro fan controller */
+#define QUADRO_POWER_CYCLES 0x18
+#define QUADRO_NUM_FANS 4
+#define QUADRO_NUM_SENSORS 4
+#define QUADRO_SENSOR_START 0x34
+#define QUADRO_CTRL_REPORT_SIZE 0x3c1
+#define QUADRO_FLOW_SENSOR_OFFSET 0x6e
+static u8 quadro_sensor_fan_offsets[] = { 0x70, 0x7D, 0x8A, 0x97 };
+
+/* Fan speed registers in Quadro control report (from 0-100%) */
+static u16 quadro_ctrl_fan_offsets[] = { 0x36, 0x8b, 0xe0, 0x135 };
+
/* Labels for D5 Next */
static const char *const label_d5next_temp[] = {
"Coolant temp"
@@ -124,7 +139,7 @@ static const char *const label_d5next_current[] = {
"Fan current"
};

-/* Labels for Farbwerk, Farbwerk 360 and Octo temperature sensors */
+/* Labels for Farbwerk, Farbwerk 360 and Octo and Quadro temperature sensors */
static const char *const label_temp_sensors[] = {
"Sensor 1",
"Sensor 2",
@@ -132,7 +147,7 @@ static const char *const label_temp_sensors[] = {
"Sensor 4"
};

-/* Labels for Octo */
+/* Labels for Octo and Quadro (except speed) */
static const char *const label_fan_speed[] = {
"Fan 1 speed",
"Fan 2 speed",
@@ -177,6 +192,15 @@ static const char *const label_fan_current[] = {
"Fan 8 current"
};

+/* Labels for Quadro fan speeds */
+static const char *const label_quadro_speeds[] = {
+ "Fan 1 speed",
+ "Fan 2 speed",
+ "Fan 3 speed",
+ "Fan 4 speed",
+ "Flow speed [dL/h]"
+};
+
struct aqc_data {
struct hid_device *hdev;
struct device *hwmon_dev;
@@ -197,6 +221,7 @@ struct aqc_data {
int num_temp_sensors;
int temp_sensor_start_offset;
u16 power_cycle_count_offset;
+ u8 flow_sensor_offset;

/* General info, same across all devices */
u32 serial_number[2];
@@ -334,6 +359,18 @@ static umode_t aqc_is_visible(const void *data, enum hwmon_sensor_types type, u3
}
break;
case hwmon_fan:
+ switch (priv->kind) {
+ case quadro:
+ /* Special case to support flow sensor */
+ if (channel < priv->num_fans + 1)
+ return 0444;
+ break;
+ default:
+ if (channel < priv->num_fans)
+ return 0444;
+ break;
+ }
+ break;
case hwmon_power:
case hwmon_curr:
if (channel < priv->num_fans)
@@ -578,6 +615,9 @@ static int aqc_raw_event(struct hid_device *hdev, struct hid_report *report, u8
priv->voltage_input[2] = get_unaligned_be16(data + D5NEXT_5V_VOLTAGE) * 10;
priv->voltage_input[3] = get_unaligned_be16(data + D5NEXT_12V_VOLTAGE) * 10;
break;
+ case quadro:
+ priv->speed_input[4] = get_unaligned_be16(data + priv->flow_sensor_offset);
+ break;
default:
break;
}
@@ -719,6 +759,24 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
priv->voltage_label = label_fan_voltage;
priv->current_label = label_fan_current;
break;
+ case USB_PRODUCT_ID_QUADRO:
+ priv->kind = quadro;
+
+ priv->num_fans = QUADRO_NUM_FANS;
+ priv->fan_sensor_offsets = quadro_sensor_fan_offsets;
+ priv->fan_ctrl_offsets = quadro_ctrl_fan_offsets;
+ priv->num_temp_sensors = QUADRO_NUM_SENSORS;
+ priv->temp_sensor_start_offset = QUADRO_SENSOR_START;
+ priv->power_cycle_count_offset = QUADRO_POWER_CYCLES;
+ priv->buffer_size = QUADRO_CTRL_REPORT_SIZE;
+ priv->flow_sensor_offset = QUADRO_FLOW_SENSOR_OFFSET;
+
+ priv->temp_label = label_temp_sensors;
+ priv->speed_label = label_quadro_speeds;
+ priv->power_label = label_fan_power;
+ priv->voltage_label = label_fan_voltage;
+ priv->current_label = label_fan_current;
+ break;
default:
break;
}
@@ -774,6 +832,7 @@ static const struct hid_device_id aqc_table[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_FARBWERK) },
{ HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_FARBWERK360) },
{ HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_OCTO) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_QUADRO) },
{ }
};

--
2.37.1
\
 
 \ /
  Last update: 2022-07-27 12:08    [W:0.054 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site