lkml.org 
[lkml]   [2022]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] genirq: allow selection of number of sparse irqs
Date
Currently the maximum number of interrupters is capped at 8260 (64 +
8196) in most of the architectures were CONFIG_SPARSE_IRQ is selected.
This upper limit is not sufficient for couple of existing SoC's from
Marvell.
For eg: Octeon TX2 series of processors support a maximum of 32K
interrupters.

Allow configuration of the upper limit of the number of interrupts.

Cc: George Cherian <george.cherian@marvell.com>
Cc: sgoutham@marvell.com
Cc: "BOBBY Liu (bobbliu)" <bobbliu@cisco.com>
Cc: xe-linux-external@cisco.com
Signed-off-by: Daniel Walker <danielwa@cisco.com>
---
kernel/irq/Kconfig | 23 +++++++++++++++++++++++
kernel/irq/internals.h | 10 +++++++++-
2 files changed, 32 insertions(+), 1 deletion(-)

diff --git a/kernel/irq/Kconfig b/kernel/irq/Kconfig
index db3d174c53d4..b356217abcfe 100644
--- a/kernel/irq/Kconfig
+++ b/kernel/irq/Kconfig
@@ -125,6 +125,29 @@ config SPARSE_IRQ

If you don't know what to do here, say N.

+choice
+ prompt "Select number of sparse irqs"
+ depends on SPARSE_IRQ
+ default SPARSE_IRQ_EXTEND_8K
+ help
+ Allows choosing the number of sparse irq's available on the
+ system. For each 8k of additional irqs added there is approximatly
+ 1kb of kernel size increase.
+
+config SPARSE_IRQ_EXTEND_8K
+ bool "8k"
+
+config SPARSE_IRQ_EXTEND_16K
+ bool "16K"
+
+config SPARSE_IRQ_EXTEND_32K
+ bool "32K"
+
+config SPARSE_IRQ_EXTEND_64K
+ bool "64K"
+
+endchoice
+
config GENERIC_IRQ_DEBUGFS
bool "Expose irq internals in debugfs"
depends on DEBUG_FS
diff --git a/kernel/irq/internals.h b/kernel/irq/internals.h
index f09c60393e55..25fe5abf6c16 100644
--- a/kernel/irq/internals.h
+++ b/kernel/irq/internals.h
@@ -12,7 +12,15 @@
#include <linux/sched/clock.h>

#ifdef CONFIG_SPARSE_IRQ
-# define IRQ_BITMAP_BITS (NR_IRQS + 8196)
+# if defined(CONFIG_SPARSE_IRQ_EXTEND_8K)
+# define IRQ_BITMAP_BITS (NR_IRQS + 8192 + 4)
+# elif defined(CONFIG_SPARSE_IRQ_EXTEND_16K)
+# define IRQ_BITMAP_BITS (NR_IRQS + 16384 + 4)
+# elif defined(CONFIG_SPARSE_IRQ_EXTEND_32K)
+# define IRQ_BITMAP_BITS (NR_IRQS + 32768 + 4)
+# elif defined(CONFIG_SPARSE_IRQ_EXTEND_64K)
+# define IRQ_BITMAP_BITS (NR_IRQS + 65536 + 4)
+# endif
#else
# define IRQ_BITMAP_BITS NR_IRQS
#endif
--
2.25.1
\
 
 \ /
  Last update: 2022-07-28 05:06    [W:0.067 / U:0.496 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site