lkml.org 
[lkml]   [2022]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v2 03/10] dt-bindings: iio: amplifiers: adi,ada4250: use spi-peripheral-props.yaml
    Date
    Instead of listing directly properties typical for SPI peripherals,
    reference the spi-peripheral-props.yaml schema. This allows using all
    properties typical for SPI-connected devices, even these which device
    bindings author did not tried yet.

    Remove the spi-* properties which now come via spi-peripheral-props.yaml
    schema, except for the cases when device schema adds some constraints
    like maximum frequency.

    While changing additionalProperties->unevaluatedProperties, put it in
    typical place, just before example DTS.

    Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
    ---
    .../devicetree/bindings/iio/amplifiers/adi,ada4250.yaml | 7 ++++---
    1 file changed, 4 insertions(+), 3 deletions(-)

    diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml
    index 5277479be382..c15da155d300 100644
    --- a/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml
    +++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml
    @@ -27,14 +27,15 @@ properties:
    Enable internal buffer to drive the reference pin.
    type: boolean

    - spi-max-frequency: true
    -
    required:
    - compatible
    - reg
    - avdd-supply

    -additionalProperties: false
    +allOf:
    + - $ref: /schemas/spi/spi-peripheral-props.yaml#
    +
    +unevaluatedProperties: false

    examples:
    - |
    --
    2.34.1
    \
     
     \ /
      Last update: 2022-07-27 19:28    [W:3.259 / U:0.096 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site