lkml.org 
[lkml]   [2022]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] dt-bindings: wireless: use spi-peripheral-props.yaml
Date
Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema. This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.

Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.

While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Technically, this depends on [1] merged to SPI tree, if we want to
preserve existing behavior of not allowing SPI CPHA and CPOL in each of
schemas in this patch.

If this patch comes independently via different tree, the SPI CPHA and
CPOL will be allowed for brief period of time, before [1] is merged.
This will not have negative impact, just DT schema checks will be
loosened for that period.

[1] https://lore.kernel.org/all/20220722191539.90641-2-krzysztof.kozlowski@linaro.org/
---
.../net/wireless/microchip,wilc1000.yaml | 7 ++--
.../bindings/net/wireless/silabs,wfx.yaml | 15 +++------
.../bindings/net/wireless/ti,wlcore.yaml | 32 +++++++++----------
3 files changed, 25 insertions(+), 29 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml
index 60de78f1bc7b..b3405f284580 100644
--- a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml
@@ -20,8 +20,6 @@ properties:

reg: true

- spi-max-frequency: true
-
interrupts:
maxItems: 1

@@ -51,7 +49,10 @@ required:
- compatible
- interrupts

-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false

examples:
- |
diff --git a/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml b/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml
index 76199a67d628..b35d2f3ad1ad 100644
--- a/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml
@@ -29,12 +29,6 @@ description: >
Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml for more
information.

- For SPI:
-
- In add of the properties below, please consult
- Documentation/devicetree/bindings/spi/spi-controller.yaml for optional SPI
- related properties.
-
properties:
compatible:
items:
@@ -52,8 +46,6 @@ properties:
bindings.
maxItems: 1

- spi-max-frequency: true
-
interrupts:
description: The interrupt line. Should be IRQ_TYPE_EDGE_RISING. When SPI is
used, this property is required. When SDIO is used, the "in-band"
@@ -84,12 +76,15 @@ properties:

mac-address: true

-additionalProperties: false
-
required:
- compatible
- reg

+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
#include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml
index d68bb2ec1f7e..e31456730e9f 100644
--- a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml
@@ -36,8 +36,6 @@ properties:
This is required when connected via SPI, and optional when connected via
SDIO.

- spi-max-frequency: true
-
interrupts:
minItems: 1
maxItems: 2
@@ -69,20 +67,22 @@ required:
- compatible
- interrupts

-if:
- properties:
- compatible:
- contains:
- enum:
- - ti,wl1271
- - ti,wl1273
- - ti,wl1281
- - ti,wl1283
-then:
- required:
- - ref-clock-frequency
-
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - ti,wl1271
+ - ti,wl1273
+ - ti,wl1281
+ - ti,wl1283
+ then:
+ required:
+ - ref-clock-frequency
+
+unevaluatedProperties: false

examples:
- |
--
2.34.1
\
 
 \ /
  Last update: 2022-07-27 19:13    [W:0.059 / U:0.612 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site