lkml.org 
[lkml]   [2022]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v4 1/1] bus: mhi: host: Move IRQ allocation to controller registration phase
Date
Manivannan Sadhasivam <mani@kernel.org> writes:

> On Mon, Jul 25, 2022 at 09:00:08PM +0300, Kalle Valo wrote:
>
>> Manivannan Sadhasivam <mani@kernel.org> writes:
>>
>> > On Wed, Jul 20, 2022 at 05:47:37PM +0800, Qiang Yu wrote:
>> >
>> >>
>> >> On 7/20/2022 5:39 PM, Manivannan Sadhasivam wrote:
>> >> > On Mon, Jul 18, 2022 at 02:15:23PM +0300, Kalle Valo wrote:
>> >> > > + ath11k list
>> >> > >
>> >> > > Manivannan Sadhasivam <mani@kernel.org> writes:
>> >> > >
>> >> > > > On Thu, Jun 23, 2022 at 10:43:03AM +0800, Qiang Yu wrote:
>> >> > > > > During runtime, the MHI endpoint may be powered up/down several times.
>> >> > > > > So instead of allocating and destroying the IRQs all the time, let's just
>> >> > > > > enable/disable IRQs during power up/down.
>> >> > > > >
>> >> > > > > The IRQs will be allocated during mhi_register_controller() and freed
>> >> > > > > during mhi_unregister_controller(). This works well for things like PCI
>> >> > > > > hotplug also as once the PCI device gets removed, the controller will
>> >> > > > > get unregistered. And once it comes back, it will get registered back
>> >> > > > > and even if the IRQ configuration changes (MSI), that will get accounted.
>> >> > > > >
>> >> > > > > Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
>> >> > > > Applied to mhi-next!
>> >> > > I did a bisect and this patch breaks ath11k during rmmod. I'm on
>> >> > > vacation right now so I can't investigate in detail but more info below.
>> >> > >
>> >> > I just tested linux-next/master next-20220718 on my NUC with QCA6390, but I'm
>> >> > not able to reproduce the issue during rmmod! Instead I couldn't connect to AP.
>> >>
>> >> I suspect that in __free_irq(), if CONFIG_DEBUG_SHIRQ is enabled, irq
>> >> handler for a shared IRQ will be invoked and null pointer access happen.
>> >>
>> >> #ifdef CONFIG_DEBUG_SHIRQ
>> >>     /*
>> >>      * It's a shared IRQ -- the driver ought to be prepared for an IRQ
>> >>      * event to happen even now it's being freed, so let's make sure that
>> >>      * is so by doing an extra call to the handler ....
>> >>      *
>> >>      * ( We do this after actually deregistering it, to make sure that a
>> >>      *   'real' IRQ doesn't run in parallel with our fake. )
>> >>      */
>> >>     if (action->flags & IRQF_SHARED) {
>> >>         local_irq_save(flags);
>> >>         action->handler(irq, dev_id);
>> >>         local_irq_restore(flags);
>> >>     }
>> >> #endif
>> >>
>> >
>> > Ah yes, after enabling CONFIG_DEBUG_SHIRQ I could reproduce the issue.
>>
>> So how to fix this regression? (If there's already a fix I might have
>> missed it as I came back only today)
>>
>
> Copied you on the fix patch. Please test and let us know!

Thanks, testing it right now. Will let you know the result as a reply to
the patch.

--
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

\
 
 \ /
  Last update: 2022-07-26 19:49    [W:0.062 / U:0.840 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site