lkml.org 
[lkml]   [2022]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH 16/17] arm64: dts: mediatek: add mt8365 device-tree
Date
Hi Fabien,

Could you please add CPUIDLE support:

diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
index 323c814c10cc..1df4075db58f 100644
--- a/arch/arm64/boot/dts/mediatek/mt8365.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
@@ -59,6 +59,7 @@ cpu0: cpu@0 {
clocks = <&mcucfg CLK_MCU_BUS_SEL>,
<&apmixedsys CLK_APMIXED_MAINPLL>;
clock-names = "cpu", "intermediate";
+ cpu-idle-states = <&MCDI_CPU &MCDI_CLUSTER &DPIDLE>;
operating-points-v2 = <&cluster0_opp>;
#cooling-cells = <2>;
enable-method = "psci";
@@ -72,6 +73,7 @@ cpu1: cpu@1 {
clocks = <&mcucfg CLK_MCU_BUS_SEL>,
<&apmixedsys CLK_APMIXED_MAINPLL>;
clock-names = "cpu", "intermediate", "armpll";
+ cpu-idle-states = <&MCDI_CPU &MCDI_CLUSTER &DPIDLE>;
operating-points-v2 = <&cluster0_opp>;
#cooling-cells = <2>;
enable-method = "psci";
@@ -85,6 +87,7 @@ cpu2: cpu@2 {
clocks = <&mcucfg CLK_MCU_BUS_SEL>,
<&apmixedsys CLK_APMIXED_MAINPLL>;
clock-names = "cpu", "intermediate", "armpll";
+ cpu-idle-states = <&MCDI_CPU &MCDI_CLUSTER &DPIDLE>;
operating-points-v2 = <&cluster0_opp>;
#cooling-cells = <2>;
enable-method = "psci";
@@ -98,10 +101,42 @@ cpu3: cpu@3 {
clocks = <&mcucfg CLK_MCU_BUS_SEL>,
<&apmixedsys CLK_APMIXED_MAINPLL>;
clock-names = "cpu", "intermediate", "armpll";
+ cpu-idle-states = <&MCDI_CPU &MCDI_CLUSTER &DPIDLE>;
operating-points-v2 = <&cluster0_opp>;
#cooling-cells = <2>;
enable-method = "psci";
};
+
+ idle-states {
+ entry-method = "psci";
+
+ MCDI_CPU: mcdi-cpu {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x00010001>;
+ entry-latency-us = <300>;
+ exit-latency-us = <200>;
+ min-residency-us = <1000>;
+ };
+
+ MCDI_CLUSTER: mcdi-cluster {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x01010001>;
+ entry-latency-us = <350>;
+ exit-latency-us = <250>;
+ min-residency-us = <1200>;
+ };
+
+ DPIDLE: dpidle {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x01010004>;
+ entry-latency-us = <300>;
+ exit-latency-us = <800>;
+ min-residency-us = <3300>;
+ };
+ };
};

cluster0_opp: opp-table-0 {
I have tested it on i350 evk and each idle state is used properly.

Regards,
Amjad

\
 
 \ /
  Last update: 2022-07-26 11:58    [W:1.112 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site