lkml.org 
[lkml]   [2022]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [net-next v2 3/3] dt-bindings: net: adin1110: Add docs
> You had phy nodes here, but they were not replaced with the phy-handle.
> No ethernet-ports or mdios with phy?

Since this is integrated silicon, much of that is not required. There
is a fixed relationship between the MAC and the PHY, so phy-handle is
pointless. There is no need to describe the MDIO bus, because nothing
can change. phy-mode is pointless, since it can only be internal.

ethernet-ports might be useful, if you want to use two different MAC
addresses. However, with Ethernet switches, you generally use the same
MAC address on all ports.

So i don't see a need for any of these properties.

Andrew

\
 
 \ /
  Last update: 2022-07-25 21:54    [W:0.108 / U:0.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site