lkml.org 
[lkml]   [2022]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 9/9] sched/psi: add PSI_IRQ to track IRQ/SOFTIRQ pressure
On Thu, Jul 21, 2022 at 12:04:39PM +0800, Chengming Zhou wrote:
> Now PSI already tracked workload pressure stall information for
> CPU, memory and IO. Apart from these, IRQ/SOFTIRQ could have
> obvious impact on some workload productivity, such as web service
> workload.
>
> When CONFIG_IRQ_TIME_ACCOUNTING, we can get IRQ/SOFTIRQ delta time
> from update_rq_clock_task(), in which we can record that delta
> to CPU curr task's cgroups as PSI_IRQ_FULL status.
>
> Note we don't use PSI_IRQ_SOME since IRQ/SOFTIRQ always happen in
> the current task on the CPU, make nothing productive could run
> even if it were runnable, so we only use PSI_IRQ_FULL.

That sounds reasonable.

> For performance impact consideration, this is enabled by default when
> CONFIG_IRQ_TIME_ACCOUNTING, but can be disabled by kernel cmdline
> parameter "psi_irq=".

If there isn't a concrete usecase already, let's not add another
commandline parameter for now.

> @@ -63,9 +64,11 @@ enum psi_states {
> PSI_MEM_FULL,
> PSI_CPU_SOME,
> PSI_CPU_FULL,
> + PSI_IRQ_SOME,
> + PSI_IRQ_FULL,
> /* Only per-CPU, to weigh the CPU in the global average: */
> PSI_NONIDLE,
> - NR_PSI_STATES = 7,
> + NR_PSI_STATES = 9,
> };

Unfortunately, this grows the psi state touched by the scheduler into
a second cacheline. :( Please reclaim space first.

I think we can remove the NR_CPU task count, which frees up one
u32. Something like the below diff should work (untested!)

And you should be able to remove PSI_IRQ_SOME, since it's not used
anyway. Then we'd be good to go.

diff --git a/include/linux/psi_types.h b/include/linux/psi_types.h
index c7fe7c089718..31dc76e2d8ea 100644
--- a/include/linux/psi_types.h
+++ b/include/linux/psi_types.h
@@ -15,13 +15,6 @@ enum psi_task_count {
NR_IOWAIT,
NR_MEMSTALL,
NR_RUNNING,
- /*
- * This can't have values other than 0 or 1 and could be
- * implemented as a bit flag. But for now we still have room
- * in the first cacheline of psi_group_cpu, and this way we
- * don't have to special case any state tracking for it.
- */
- NR_ONCPU,
/*
* For IO and CPU stalls the presence of running/oncpu tasks
* in the domain means a partial rather than a full stall.
@@ -39,9 +32,11 @@ enum psi_task_count {
#define TSK_IOWAIT (1 << NR_IOWAIT)
#define TSK_MEMSTALL (1 << NR_MEMSTALL)
#define TSK_RUNNING (1 << NR_RUNNING)
-#define TSK_ONCPU (1 << NR_ONCPU)
#define TSK_MEMSTALL_RUNNING (1 << NR_MEMSTALL_RUNNING)

+/* Only one task can be scheduled, no corresponding task count */
+#define TSK_ONCPU (1 << NR_PSI_TASK_COUNTS)
+
/* Resources that workloads could be stalled on */
enum psi_res {
PSI_IO,
diff --git a/kernel/sched/psi.c b/kernel/sched/psi.c
index a4fa3aadfcba..232e1dbfad46 100644
--- a/kernel/sched/psi.c
+++ b/kernel/sched/psi.c
@@ -215,7 +215,7 @@ void __init psi_init(void)
group_init(&psi_system);
}

-static bool test_state(unsigned int *tasks, enum psi_states state)
+static bool test_state(unsigned int *tasks, enum psi_states state, bool oncpu)
{
switch (state) {
case PSI_IO_SOME:
@@ -228,9 +228,9 @@ static bool test_state(unsigned int *tasks, enum psi_states state)
return unlikely(tasks[NR_MEMSTALL] &&
tasks[NR_RUNNING] == tasks[NR_MEMSTALL_RUNNING]);
case PSI_CPU_SOME:
- return unlikely(tasks[NR_RUNNING] > tasks[NR_ONCPU]);
+ return unlikely(tasks[NR_RUNNING] > oncpu);
case PSI_CPU_FULL:
- return unlikely(tasks[NR_RUNNING] && !tasks[NR_ONCPU]);
+ return unlikely(tasks[NR_RUNNING] && !oncpu);
case PSI_NONIDLE:
return tasks[NR_IOWAIT] || tasks[NR_MEMSTALL] ||
tasks[NR_RUNNING];
@@ -692,9 +692,9 @@ static void psi_group_change(struct psi_group *group, int cpu,
bool wake_clock)
{
struct psi_group_cpu *groupc;
- u32 state_mask = 0;
unsigned int t, m;
enum psi_states s;
+ u32 state_mask;

groupc = per_cpu_ptr(group->pcpu, cpu);

@@ -710,6 +710,26 @@ static void psi_group_change(struct psi_group *group, int cpu,

record_times(groupc, now);

+ /*
+ * Start with TSK_ONCPU, which doesn't have a corresponding
+ * task count - it's just a boolean flag directly encoded in
+ * the state mask. Clear, set, or carry the current state if
+ * no changes are requested.
+ */
+ if (clear & TSK_ONCPU) {
+ state_mask = 0;
+ clear &= ~TSK_ONCPU;
+ } else if (set & TSK_ONCPU) {
+ state_mask = TSK_ONCPU;
+ set &= ~TSK_ONCPU;
+ } else {
+ state_mask = groupc->state_mask & TSK_ONCPU;
+ }
+
+ /*
+ * The rest of the state mask is calculated based on the task
+ * counts. Update those first, then construct the mask.
+ */
for (t = 0, m = clear; m; m &= ~(1 << t), t++) {
if (!(m & (1 << t)))
continue;
@@ -729,9 +749,8 @@ static void psi_group_change(struct psi_group *group, int cpu,
if (set & (1 << t))
groupc->tasks[t]++;

- /* Calculate state mask representing active states */
for (s = 0; s < NR_PSI_STATES; s++) {
- if (test_state(groupc->tasks, s))
+ if (test_state(groupc->tasks, s, state_mask & TSK_ONCPU))
state_mask |= (1 << s);
}

@@ -743,7 +762,7 @@ static void psi_group_change(struct psi_group *group, int cpu,
* task in a cgroup is in_memstall, the corresponding groupc
* on that cpu is in PSI_MEM_FULL state.
*/
- if (unlikely(groupc->tasks[NR_ONCPU] && cpu_curr(cpu)->in_memstall))
+ if (unlikely((state_mask & TSK_ONCPU) && cpu_curr(cpu)->in_memstall))
state_mask |= (1 << PSI_MEM_FULL);

groupc->state_mask = state_mask;
@@ -847,7 +866,8 @@ void psi_task_switch(struct task_struct *prev, struct task_struct *next,
iter = NULL;
while ((group = iterate_groups(next, &iter))) {
if (identical_state &&
- per_cpu_ptr(group->pcpu, cpu)->tasks[NR_ONCPU]) {
+ (per_cpu_ptr(group->pcpu, cpu)->state_mask &
+ TSK_ONCPU)) {
common = group;
break;
}
\
 
 \ /
  Last update: 2022-07-25 20:26    [W:1.681 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site