lkml.org 
[lkml]   [2022]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] fuse: writeback_cache consistency enhancement (writeback_cache_v2)
On Mon, Jul 18, 2022 at 01:17:10PM +0800, Jiachen Zhang wrote:
> On Thu, Jun 30, 2022 at 1:57 AM Vivek Goyal <vgoyal@redhat.com> wrote:
> >
> > On Fri, Jun 24, 2022 at 01:58:25PM +0800, Jiachen Zhang wrote:
> > > Some users may want both the high performance of the writeback_cahe mode and
> > > a little bit more consistency among FUSE mounts. In the current writeback
> > > mode implementation, users of one FUSE mount can never see the file
> > > expansion done by other FUSE mounts.
> > >
> > > Based on the suggested writeback V2 patch in the upstream mailing-list [1],
> > > this commit allows the cmtime and size to be updated from server in
> > > writeback mode. Compared with the writeback V2 patch in [1], this commit has
> > > several differences:
> > >
> > > 1. Ensure c/mtime are not updated from kernel to server. IOW, the cmtime
> > > generated by kernel are just temporary values that are never flushed to
> > > server, and they can also be updated by the official server cmtime when
> > > the writeback cache is clean.
> > >
> > > 2. Skip mtime-based revalidation when fc->auto_inval_data is set with
> > > fc->writeback_cache_v2. Because the kernel-generated temporary cmtime
> > > are likely not equal to the offical server cmtime.
> >
> > We have a init flag to negotiate FUSE_AUTO_INVAL_DATA to enable/disable
> > fc->auto_inval_data. So should it be filesystem's (user space) responsibility
> > to not use FUSE_AUTO_INVAL_DATA when using FUSE_WRITEBACK_CACHE. I mean,
> > otherwise it is confusing. On one hand filesystem is using FUSE_AUTO_INVAL_DATA
> > but it silently is ingored by kernel because FUSE_WRITEBACK_CACHE is
> > being used as well.
> >
>
> Hi Vivek,
>
> The fc->auto_inval_data branch code is also skipped in writeback_cache
> v1 mode, so I think we can also skip it in writeback_cache_v2. I
> listed this point here because it is not skipped in Miklos'
> writeback_cache_v2 initial patch.

So, fc->auto_inval_data seems to invalidate inode pages if either file
size or mtime in user space (file server) has changed since last cached
value.

With writeback cache v1, we don't even trust/use size or mtime value
as retrieved from server. And if we are not using size/mtime value as
retrieved from server, there is no question of invalidating local cached
data. Idea seems to be that we are writing and caching the contents
locally (and not expecting the changes to take place on server from other
clients). So for v1 mode, it kind of makes sense to not pay attention
to auto_inval_data.

For write cache v2, on one hand you are updating the size as received
from the server. So you are epxecting another client to update the
file. But at the same time you are not willing to invalidate local
page cache. That is not making much sense to me.

For example, say with writeback cache v2, you have cached few pages (not
dirty) from file foo.txt in the kernel (client). Now another client
overwrites the file foo.txt and hence modified mtime. When you get new
mtime in first client (kenrel), you will simply ignore it and continue
to use old data?

I think you need to write a more coherent changelog/cover-letter. First
define what's the current behavior and then define what will be the
new behavior and how does it impact overall caching etc. We seem to be
talking about small individual pieces but I am not sure I am clear
on overall architecture of this new mode.

Thanks
Vivek


>
> Thanks,
> Jiachen
>
> > will it make more sense to just document it and let filesystem authors
> > enable options carefully.
> >
> > BTW, this probably should be a separate patch in the patch series anyway
> > with proper explanation.
> >
> > Thanks
> > Vivek
> >
> > >
> > > 3. If any page is ever flushed to the server during FUSE_GETATTR
> > > handling on fuse server, even if the cache is clean when
> > > fuse_change_attributes() checks, we should not update the i_size. This
> > > is because the FUSE_GETATTR may get a staled size before the FUSE_WRITE
> > > request changes server inode size. This commit ensures this by
> > > increasing attr_version after writeback for writeback_cache_v2. In that
> > > case, we should also ensure the ordering of the attr_version updating
> > > and the fi->writepages RB-tree updating. So that if a fuse page
> > > writeback ever happens during fuse_change_attributes(), either the
> > > fi->writepages is not empty, or the attr_version is increased. So we
> > > never mistakenly update a stale file size from server to kernel.
> > >
> > > With this patch, writeback mode can consider the server c/mtime as the
> > > official one. When inode attr is timeout or invalidated, kernel has chance
> > > to see size and c/mtime modified by others.
> > >
> > > Together with another patch [2], a FUSE daemon is able to implement
> > > close-to-open (CTO) consistency like what is done in NFS clients.
> > >
> > > [1] https://lore.kernel.org/linux-fsdevel/Ymfu8fGbfYi4FxQ4@miu.piliscsaba.redhat.com
> > > [2] https://lore.kernel.org/linux-fsdevel/20220608104202.19461-1-zhangjiachen.jaycee@bytedance.com/
> > >
> > > Suggested-by: Miklos Szeredi <mszeredi@redhat.com>
> > > Signed-off-by: Jiachen Zhang <zhangjiachen.jaycee@bytedance.com>
> > > ---
> > > fs/fuse/file.c | 17 +++++++++++++++
> > > fs/fuse/fuse_i.h | 3 +++
> > > fs/fuse/inode.c | 44 +++++++++++++++++++++++++++++++++++++--
> > > include/uapi/linux/fuse.h | 5 +++++
> > > 4 files changed, 67 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/fs/fuse/file.c b/fs/fuse/file.c
> > > index 9b64e2ff1c96..35bdc7af8468 100644
> > > --- a/fs/fuse/file.c
> > > +++ b/fs/fuse/file.c
> > > @@ -1829,6 +1829,15 @@ static void fuse_writepage_end(struct fuse_mount *fm, struct fuse_args *args,
> > > */
> > > fuse_send_writepage(fm, next, inarg->offset + inarg->size);
> > > }
> > > +
> > > + if (fc->writeback_cache_v2)
> > > + fi->attr_version = atomic64_inc_return(&fc->attr_version);
> > > + /*
> > > + * Ensure attr_version increases before the page is move out of the
> > > + * writepages rb-tree.
> > > + */
> > > + smp_mb();
> > > +
> > > fi->writectr--;
> > > fuse_writepage_finish(fm, wpa);
> > > spin_unlock(&fi->lock);
> > > @@ -1858,10 +1867,18 @@ static struct fuse_file *fuse_write_file_get(struct fuse_inode *fi)
> > >
> > > int fuse_write_inode(struct inode *inode, struct writeback_control *wbc)
> > > {
> > > + struct fuse_conn *fc = get_fuse_conn(inode);
> > > struct fuse_inode *fi = get_fuse_inode(inode);
> > > struct fuse_file *ff;
> > > int err;
> > >
> > > + /*
> > > + * Kernel c/mtime should not be updated to the server in the
> > > + * writeback_cache_v2 mode as server c/mtime are official.
> > > + */
> > > + if (fc->writeback_cache_v2)
> > > + return 0;
> > > +
> > > /*
> > > * Inode is always written before the last reference is dropped and
> > > * hence this should not be reached from reclaim.
> > > diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
> > > index 488b460e046f..47de36146fb8 100644
> > > --- a/fs/fuse/fuse_i.h
> > > +++ b/fs/fuse/fuse_i.h
> > > @@ -654,6 +654,9 @@ struct fuse_conn {
> > > /* show legacy mount options */
> > > unsigned int legacy_opts_show:1;
> > >
> > > + /* Improved writeback cache policy */
> > > + unsigned writeback_cache_v2:1;
> > > +
> > > /*
> > > * fs kills suid/sgid/cap on write/chown/trunc. suid is killed on
> > > * write/trunc only if caller did not have CAP_FSETID. sgid is killed
> > > diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
> > > index 8c0665c5dff8..2d5fa82b08b6 100644
> > > --- a/fs/fuse/inode.c
> > > +++ b/fs/fuse/inode.c
> > > @@ -237,14 +237,41 @@ void fuse_change_attributes(struct inode *inode, struct fuse_attr *attr,
> > > u32 cache_mask;
> > > loff_t oldsize;
> > > struct timespec64 old_mtime;
> > > + bool try_wb_update = false;
> > > +
> > > + if (fc->writeback_cache_v2 && S_ISREG(inode->i_mode)) {
> > > + inode_lock(inode);
> > > + try_wb_update = true;
> > > + }
> > >
> > > spin_lock(&fi->lock);
> > > /*
> > > * In case of writeback_cache enabled, writes update mtime, ctime and
> > > * may update i_size. In these cases trust the cached value in the
> > > * inode.
> > > + *
> > > + * In writeback_cache_v2 mode, if all the following conditions are met,
> > > + * then we allow the attributes to be refreshed:
> > > + *
> > > + * - inode is not in the process of being written (I_SYNC)
> > > + * - inode has no dirty pages (I_DIRTY_PAGES)
> > > + * - inode data-related attributes are clean (I_DIRTY_DATASYNC)
> > > + * - inode does not have any page writeback in progress
> > > + *
> > > + * Note: checking PAGECACHE_TAG_WRITEBACK is not sufficient in fuse,
> > > + * since inode can appear to have no PageWriteback pages, yet still have
> > > + * outstanding write request.
> > > */
> > > cache_mask = fuse_get_cache_mask(inode);
> > > + if (try_wb_update && !(inode->i_state & (I_DIRTY_PAGES | I_SYNC |
> > > + I_DIRTY_DATASYNC)) && RB_EMPTY_ROOT(&fi->writepages))
> > > + cache_mask &= ~(STATX_MTIME | STATX_CTIME | STATX_SIZE);
> > > + /*
> > > + * Ensure the ordering of cleanness checking and following attr_version
> > > + * comparison.
> > > + */
> > > + smp_mb();
> > > +
> > > if (cache_mask & STATX_SIZE)
> > > attr->size = i_size_read(inode);
> > >
> > > @@ -283,7 +310,13 @@ void fuse_change_attributes(struct inode *inode, struct fuse_attr *attr,
> > > truncate_pagecache(inode, attr->size);
> > > if (!fc->explicit_inval_data)
> > > inval = true;
> > > - } else if (fc->auto_inval_data) {
> > > + } else if (!fc->writeback_cache_v2 && fc->auto_inval_data) {
> > > + /*
> > > + * When fc->writeback_cache_v2 is set, the old_mtime
> > > + * can be generated by kernel and must not equal to
> > > + * new_mtime generated by server. So skip in such
> > > + * case.
> > > + */
> > > struct timespec64 new_mtime = {
> > > .tv_sec = attr->mtime,
> > > .tv_nsec = attr->mtimensec,
> > > @@ -303,6 +336,9 @@ void fuse_change_attributes(struct inode *inode, struct fuse_attr *attr,
> > >
> > > if (IS_ENABLED(CONFIG_FUSE_DAX))
> > > fuse_dax_dontcache(inode, attr->flags);
> > > +
> > > + if (try_wb_update)
> > > + inode_unlock(inode);
> > > }
> > >
> > > static void fuse_init_inode(struct inode *inode, struct fuse_attr *attr)
> > > @@ -1153,6 +1189,10 @@ static void process_init_reply(struct fuse_mount *fm, struct fuse_args *args,
> > > fc->async_dio = 1;
> > > if (flags & FUSE_WRITEBACK_CACHE)
> > > fc->writeback_cache = 1;
> > > + if (flags & FUSE_WRITEBACK_CACHE_V2) {
> > > + fc->writeback_cache = 1;
> > > + fc->writeback_cache_v2 = 1;
> > > + }
> > > if (flags & FUSE_PARALLEL_DIROPS)
> > > fc->parallel_dirops = 1;
> > > if (flags & FUSE_HANDLE_KILLPRIV)
> > > @@ -1234,7 +1274,7 @@ void fuse_send_init(struct fuse_mount *fm)
> > > FUSE_ABORT_ERROR | FUSE_MAX_PAGES | FUSE_CACHE_SYMLINKS |
> > > FUSE_NO_OPENDIR_SUPPORT | FUSE_EXPLICIT_INVAL_DATA |
> > > FUSE_HANDLE_KILLPRIV_V2 | FUSE_SETXATTR_EXT | FUSE_INIT_EXT |
> > > - FUSE_SECURITY_CTX;
> > > + FUSE_SECURITY_CTX | FUSE_WRITEBACK_CACHE_V2;
> > > #ifdef CONFIG_FUSE_DAX
> > > if (fm->fc->dax)
> > > flags |= FUSE_MAP_ALIGNMENT;
> > > diff --git a/include/uapi/linux/fuse.h b/include/uapi/linux/fuse.h
> > > index d6ccee961891..b474763bcf59 100644
> > > --- a/include/uapi/linux/fuse.h
> > > +++ b/include/uapi/linux/fuse.h
> > > @@ -194,6 +194,7 @@
> > > * - add FUSE_SECURITY_CTX init flag
> > > * - add security context to create, mkdir, symlink, and mknod requests
> > > * - add FUSE_HAS_INODE_DAX, FUSE_ATTR_DAX
> > > + * - add FUSE_WRITEBACK_CACHE_V2 init flag
> > > */
> > >
> > > #ifndef _LINUX_FUSE_H
> > > @@ -353,6 +354,9 @@ struct fuse_file_lock {
> > > * FUSE_SECURITY_CTX: add security context to create, mkdir, symlink, and
> > > * mknod
> > > * FUSE_HAS_INODE_DAX: use per inode DAX
> > > + * FUSE_WRITEBACK_CACHE_V2:
> > > + * allow time/size to be refreshed if no pending write
> > > + * c/mtime not updated from kernel to server
> > > */
> > > #define FUSE_ASYNC_READ (1 << 0)
> > > #define FUSE_POSIX_LOCKS (1 << 1)
> > > @@ -389,6 +393,7 @@ struct fuse_file_lock {
> > > /* bits 32..63 get shifted down 32 bits into the flags2 field */
> > > #define FUSE_SECURITY_CTX (1ULL << 32)
> > > #define FUSE_HAS_INODE_DAX (1ULL << 33)
> > > +#define FUSE_WRITEBACK_CACHE_V2 (1ULL << 34)
> > >
> > > /**
> > > * CUSE INIT request/reply flags
> > > --
> > > 2.20.1
> > >
> >
>

\
 
 \ /
  Last update: 2022-07-25 15:16    [W:0.111 / U:24.692 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site