lkml.org 
[lkml]   [2022]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/5] soc: visconti: Add Toshiba Visconti image processing accelerator common source
On Fri, Jul 22, 2022 at 05:28:55PM +0900, Yuji Ishikawa wrote:
> This commit adds common definitions shared among image processing accelerator drivers
> for Toshiba Visconti SoCs.

Please wrap your changelog text lines properly at 72 columns.

And you need to provide a lot more information here as to what this is,
it's not enough to be able to properly review this with just a single
sentence.

>
> Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
> Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
> ---
> v1 -> v2:
> - applied checkpatch.pl --strict
> ---
> drivers/soc/Kconfig | 1 +
> drivers/soc/Makefile | 1 +
> drivers/soc/visconti/Kconfig | 1 +
> drivers/soc/visconti/Makefile | 6 +++
> drivers/soc/visconti/ipa_common.c | 55 +++++++++++++++++++
> drivers/soc/visconti/ipa_common.h | 18 +++++++
> drivers/soc/visconti/uapi/ipa.h | 90 +++++++++++++++++++++++++++++++
> 7 files changed, 172 insertions(+)
> create mode 100644 drivers/soc/visconti/Kconfig
> create mode 100644 drivers/soc/visconti/Makefile
> create mode 100644 drivers/soc/visconti/ipa_common.c
> create mode 100644 drivers/soc/visconti/ipa_common.h
> create mode 100644 drivers/soc/visconti/uapi/ipa.h
>
> diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
> index e8a30c4c5..c99139aa8 100644
> --- a/drivers/soc/Kconfig
> +++ b/drivers/soc/Kconfig
> @@ -22,6 +22,7 @@ source "drivers/soc/tegra/Kconfig"
> source "drivers/soc/ti/Kconfig"
> source "drivers/soc/ux500/Kconfig"
> source "drivers/soc/versatile/Kconfig"
> +source "drivers/soc/visconti/Kconfig"
> source "drivers/soc/xilinx/Kconfig"
>
> endmenu
> diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
> index a05e9fbcd..455b993c2 100644
> --- a/drivers/soc/Makefile
> +++ b/drivers/soc/Makefile
> @@ -28,4 +28,5 @@ obj-$(CONFIG_ARCH_TEGRA) += tegra/
> obj-y += ti/
> obj-$(CONFIG_ARCH_U8500) += ux500/
> obj-$(CONFIG_PLAT_VERSATILE) += versatile/
> +obj-$(CONFIG_ARCH_VISCONTI) += visconti/
> obj-y += xilinx/
> diff --git a/drivers/soc/visconti/Kconfig b/drivers/soc/visconti/Kconfig
> new file mode 100644
> index 000000000..8b1378917
> --- /dev/null
> +++ b/drivers/soc/visconti/Kconfig
> @@ -0,0 +1 @@
> +
> diff --git a/drivers/soc/visconti/Makefile b/drivers/soc/visconti/Makefile
> new file mode 100644
> index 000000000..8d710da08
> --- /dev/null
> +++ b/drivers/soc/visconti/Makefile
> @@ -0,0 +1,6 @@
> +# SPDX-License-Identifier: GPL-2.0
> +#
> +# Makefile for the Visconti specific device drivers.
> +#
> +
> +obj-y += ipa_common.o
> diff --git a/drivers/soc/visconti/ipa_common.c b/drivers/soc/visconti/ipa_common.c
> new file mode 100644
> index 000000000..6345f33c5
> --- /dev/null
> +++ b/drivers/soc/visconti/ipa_common.c
> @@ -0,0 +1,55 @@
> +// SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause

Why is this dual-licensed? I have to ask, and also, have to see some
sort of justification as to why this is needed. Doing dual-licensed
kernel code is tough and a pain and we need to know that you, and your
lawyers, understand the issues involved here.


> +/* Toshiba Visconti Image Processing Accelerator Support
> + *
> + * (C) Copyright 2022 TOSHIBA CORPORATION
> + * (C) Copyright 2022 Toshiba Electronic Devices & Storage Corporation
> + */
> +
> +#include "ipa_common.h"
> +
> +int ipa_attach_dmabuf(struct device *dev, int fd, struct dma_buf_attachment **a,
> + struct sg_table **s, dma_addr_t *addr, enum dma_data_direction dma_dir)
> +{
> + struct dma_buf_attachment *attachment;
> + struct dma_buf *dmabuf;
> + struct sg_table *sgt;
> + int ret;
> +
> + dmabuf = dma_buf_get(fd);
> + if (IS_ERR(dmabuf)) {
> + dev_err(dev, "Invalid dmabuf FD\n");
> + return PTR_ERR(dmabuf);
> + }
> + attachment = dma_buf_attach(dmabuf, dev);
> +
> + if (IS_ERR(attachment)) {
> + dev_err(dev, "Failed to attach dmabuf\n");
> + ret = PTR_ERR(attachment);
> + goto err_put;
> + }
> + sgt = dma_buf_map_attachment(attachment, dma_dir);
> + if (IS_ERR(sgt)) {
> + dev_err(dev, "Failed to get dmabufs sg_table\n");
> + ret = PTR_ERR(sgt);
> + goto err_detach;
> + }
> + if (sgt->nents != 1) {
> + dev_err(dev, "Sparse DMA region is unsupported\n");
> + ret = -EINVAL;
> + goto err_unmap;
> + }
> +
> + *addr = sg_dma_address(sgt->sgl);
> + *a = attachment;
> + *s = sgt;
> +
> + return 0;
> +
> +err_unmap:
> + dma_buf_unmap_attachment(attachment, sgt, dma_dir);
> +err_detach:
> + dma_buf_detach(dmabuf, attachment);
> +err_put:
> + dma_buf_put(dmabuf);
> + return ret;
> +}

Why do you have a whole file for one function? That feels unneeded.

thanks,

greg k-h

\
 
 \ /
  Last update: 2022-07-25 14:47    [W:0.199 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site