lkml.org 
[lkml]   [2022]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] powerpc/fsl-pci: Fix Class Code of PCIe Root Port
Date
Bjorn Helgaas <helgaas@kernel.org> writes:
> On Wed, Jul 06, 2022 at 12:10:43PM +0200, Pali Rohár wrote:
>> By default old pre-3.0 Freescale PCIe controllers reports invalid PCI Class
>> Code 0x0b20 for PCIe Root Port. It can be seen by lspci -b output on P2020
>> board which has this pre-3.0 controller:
>>
>> $ lspci -bvnn
>> 00:00.0 Power PC [0b20]: Freescale Semiconductor Inc P2020E [1957:0070] (rev 21)
>> !!! Invalid class 0b20 for header type 01
>> Capabilities: [4c] Express Root Port (Slot-), MSI 00
>>
>> Fix this issue by programming correct PCI Class Code 0x0604 for PCIe Root
>> Port to the Freescale specific PCIe register 0x474.
>>
>> With this change lspci -b output is:
>>
>> $ lspci -bvnn
>> 00:00.0 PCI bridge [0604]: Freescale Semiconductor Inc P2020E [1957:0070] (rev 21) (prog-if 00 [Normal decode])
>> Capabilities: [4c] Express Root Port (Slot-), MSI 00
>>
>> Without any "Invalid class" error. So class code was properly reflected
>> into standard (read-only) PCI register 0x08.
>>
>> Same fix is already implemented in U-Boot pcie_fsl.c driver in commit:
>> http://source.denx.de/u-boot/u-boot/-/commit/d18d06ac35229345a0af80977a408cfbe1d1015b
>>
>> Fix activated by U-Boot stay active also after booting Linux kernel.
>> But boards which use older U-Boot version without that fix are affected and
>> still require this fix.
>>
>> So implement this class code fix also in kernel fsl_pci.c driver.
>>
>> Cc: stable@vger.kernel.org
>> Signed-off-by: Pali Rohár <pali@kernel.org>
>
> I assume the powerpc folks will take care of this.

Will do.

cheers

\
 
 \ /
  Last update: 2022-07-25 14:25    [W:0.058 / U:0.560 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site