lkml.org 
[lkml]   [2022]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: WARNING: CPU: 4 PID: 326 at drivers/opp/core.c:2471 dev_pm_opp_set_config+0x344/0x620
On 22-07-22, 11:01, Naresh Kamboju wrote:
> I have found this warning on db845c while booting Linux next-20220720.
> Please find more details in the below link,
>
> Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
>
> [ 9.769688] WARNING: CPU: 4 PID: 326 at drivers/opp/core.c:2471
> dev_pm_opp_set_config+0x344/0x620
> [ 9.769698] i2c 16-0010: Fixing up cyclic dependency with acb3000.camss
> [ 9.810991] msm-mdss ae00000.mdss: Adding to iommu group 15
> [ 9.811082] Modules linked in: hci_uart qcom_camss msm(+) videobuf2_dma_sg
> [ 9.823435] ath10k_snoc 18800000.wifi: supply vdd-3.3-ch1 not
> found, using dummy regulator
> [ 9.827664] ath10k_snoc(+) btqca v4l2_fwnode btbcm ath10k_core
> venus_core(+) gpu_sched camcc_sdm845 reset_qcom_pdc v4l2_async
> v4l2_mem2mem i2c_qcom_geni videobuf2_memops ath drm_dp_aux_bus
> drm_display_helper videobuf2_v4l2 bluetooth mac80211 i2c_qcom_cci
> videobuf2_common qcom_rng spi_geni_qcom gpi(+) qcom_q6v5_mss xhci_pci
> qrtr xhci_pci_renesas cfg80211 rfkill slim_qcom_ngd_ctrl lmh
> icc_osm_l3 pdr_interface slimbus qcom_wdt display_connector icc_bwmon
> qcom_q6v5_pas qcom_pil_info qcom_q6v5 qcom_sysmon drm_kms_helper
> qcom_common qcom_glink_smem qmi_helpers mdt_loader drm socinfo
> rmtfs_mem fuse
> [ 9.885445] qcom-camss acb3000.camss: Adding to iommu group 16
> [ 9.911179] platform ae94000.dsi: Fixing up cyclic dependency with
> ae01000.display-controller
> [[0;32m OK [0m] Started D-Bus System Message Bus.[ 9.911593]
> Bluetooth: hci0: setting up wcn399x
> [ 9.928261] CPU: 4 PID: 326 Comm: systemd-udevd Not tainted
> 5.19.0-rc7-next-20220720 #1
>
> [ 9.928265] Hardware name: Thundercomm Dragonboard 845c (DT)
> [ 9.928267] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> [ 9.928269] pc : dev_pm_opp_set_config+0x344/0x620
> [ 9.977763] lr : dev_pm_opp_set_config+0x68/0x620
> [ 9.982508] sp : ffff8000089337b0
> [ 9.985846] x29: ffff8000089337b0 x28: ffff800008933c90 x27: ffff3e2780f9bc10
> [ 9.993030] x26: ffffb9048f76dd40 x25: ffffb904d98c8de8 x24: ffff3e278da60080
> [ 10.000226] x23: ffff3e2780f9bc10 x22: ffff8000089338b0 x21: ffff3e278eda0d80
> [ 10.007416] x20: ffff3e2780f9bc10 x19: ffff3e2786ffe000 x18: ffffffffffffffff
> [ 10.014602] x17: 0000000000000000 x16: ffffb904d7d90f50 x15: 6f63713d305f454c
> [ 10.021795] x14: ffffb904d9df6a20 x13: 0000000000000040 x12: 0000000000000228
> [ 10.028981] x11: 0000000000000000 x10: 0000000000000bd0 x9 : ffffb904d7d905e0
> [ 10.036166] x8 : ffff3e27833a8c30 x7 : 0000000000000018 x6 : 0000000000000001
> [ 10.043361] x5 : ffffb904d982f000 x4 : ffff3e27833a8000 x3 : ffffb904d9bf2c20
> [ 10.043365] x2 : 0000000000000000 x1 : ffff3e2786f70d00 x0 : ffff3e2786ffe060
> [ 10.043368] Call trace:
> [ 10.043369] dev_pm_opp_set_config+0x344/0x620
> [ 10.043373] devm_pm_opp_set_config+0x24/0x80
> [ 10.043376] core_get_v4+0x244/0x360 [venus_core]
> [ 10.043393] venus_probe+0x100/0x470 [venus_core]
> [ 10.043404] platform_probe+0x74/0xf0

Stanimir / Bjorn,

The OPP core expects all configuration options to be provided before the OPP
table is added. i.e. (for your case here), we need to call
devm_pm_opp_set_clkname() and devm_pm_opp_attach_genpd(), before calling
devm_pm_opp_of_add_table(). This is a hard requirement, it was a hard
requirement earlier (before the new changes in OPP core came in) too, just that
devm_pm_opp_attach_genpd() was missing the necessary WARN(), which was there in
every other helper.

Can someone from Qcom team reorder things a bit provide a patch to fix this
WARN() ? I will carry that in my tree then.

It may look like this, I don't want to touch code that I don't understand at
all:

diff --git a/drivers/media/platform/qcom/venus/pm_helpers.c b/drivers/media/platform/qcom/venus/pm_helpers.c
index cb48c5ff3dee..c93d2906e4c7 100644
--- a/drivers/media/platform/qcom/venus/pm_helpers.c
+++ b/drivers/media/platform/qcom/venus/pm_helpers.c
@@ -875,7 +875,7 @@ static int vcodec_domains_get(struct venus_core *core)
}

skip_pmdomains:
- if (!core->has_opp_table)
+ if (!core->res->opp_pmdomain)
return 0;

/* Attach the power domain for setting performance state */
@@ -1007,6 +1007,10 @@ static int core_get_v4(struct venus_core *core)
if (ret)
return ret;

+ ret = vcodec_domains_get(core);
+ if (ret)
+ return ret;
+
if (core->res->opp_pmdomain) {
ret = devm_pm_opp_of_add_table(dev);
if (!ret) {
@@ -1017,10 +1021,6 @@ static int core_get_v4(struct venus_core *core)
}
}

- ret = vcodec_domains_get(core);
- if (ret)
- return ret;
-
return 0;
}

--
viresh
\
 
 \ /
  Last update: 2022-07-25 12:28    [W:0.163 / U:0.476 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site