lkml.org 
[lkml]   [2022]   [Jul]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/3] Add SFC support for Ingenic SoCs.
From
Date
Hi Tomasz,

On 2022/7/23 下午10:47, Tomasz Maciej Nowak wrote:
> W dniu 22.07.2022 o 18:48, 周琰杰 (Zhou Yanjie) pisze:
>> 1.Use the spi-mem poll status APIs in SPI-NOR to reduce CPU load.
>> 2.Add SFC support for the X1000 SoC, the X1600 SoC, and the X2000 SoC from Ingenic.
>>
>> Liu Jinghui and Aidan MacDonald provided a lot of assistance during the development of this driver.
>>
>> 周琰杰 (Zhou Yanjie) (3):
>> mtd: spi-nor: Use the spi-mem poll status APIs.
>> dt-bindings: SPI: Add Ingenic SFC bindings.
>> SPI: Ingenic: Add SFC support for Ingenic SoCs.
>>
>> .../devicetree/bindings/spi/ingenic,sfc.yaml | 64 ++
>> drivers/mtd/spi-nor/core.c | 42 +-
>> drivers/spi/Kconfig | 9 +
>> drivers/spi/Makefile | 1 +
>> drivers/spi/spi-ingenic-sfc.c | 662 +++++++++++++++++++++
>> 5 files changed, 768 insertions(+), 10 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/spi/ingenic,sfc.yaml
>> create mode 100755 drivers/spi/spi-ingenic-sfc.c
>>
> Even tough it's still early in revision process, I'll add my
> Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
>
> The test was performed with Damai DM6291A SoC which is a Ingenic X1000 IP
> but with 256 MiB RAM. No bugs yet observed on my side.


Thanks for you test!


>

\
 
 \ /
  Last update: 2022-07-24 03:26    [W:0.246 / U:0.952 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site