lkml.org 
[lkml]   [2022]   [Jul]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/1] spi/panel: dt-bindings: drop CPHA and CPOL from common properties
Date
The spi-cpha and spi-cpol properties are device specific and should be
accepted only if device really needs them. Drop them from common
spi-peripheral-props.yaml schema, mention in few panel drivers which use
them and include instead in the SPI controller bindings. The controller
bindings will provide CPHA/CPOL type validation and one place for
description. Each device schema must list the properties if they are
applicable.

Suggested-by: Jonathan Cameron <jic23@kernel.org>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../bindings/display/panel/lgphilips,lb035q02.yaml | 3 +++
.../bindings/display/panel/samsung,ld9040.yaml | 3 +++
.../bindings/display/panel/sitronix,st7789v.yaml | 3 +++
.../devicetree/bindings/display/panel/tpo,td.yaml | 3 +++
.../devicetree/bindings/spi/spi-controller.yaml | 11 +++++++++++
.../devicetree/bindings/spi/spi-peripheral-props.yaml | 10 ----------
6 files changed, 23 insertions(+), 10 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml b/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml
index 5e4e0e552c2f..628c4b898111 100644
--- a/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml
+++ b/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml
@@ -21,6 +21,9 @@ properties:
enable-gpios: true
port: true

+ spi-cpha: true
+ spi-cpol: true
+
required:
- compatible
- enable-gpios
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml
index d525165d6d63..c0fabeb38628 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml
@@ -42,6 +42,9 @@ properties:
panel-height-mm:
description: physical panel height [mm]

+ spi-cpha: true
+ spi-cpol: true
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml
index 9e1d707c2ace..d984b59daa4a 100644
--- a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml
+++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml
@@ -23,6 +23,9 @@ properties:
backlight: true
port: true

+ spi-cpha: true
+ spi-cpol: true
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/panel/tpo,td.yaml b/Documentation/devicetree/bindings/display/panel/tpo,td.yaml
index f902a9d74141..e8c8ee8d7c88 100644
--- a/Documentation/devicetree/bindings/display/panel/tpo,td.yaml
+++ b/Documentation/devicetree/bindings/display/panel/tpo,td.yaml
@@ -28,6 +28,9 @@ properties:
backlight: true
port: true

+ spi-cpha: true
+ spi-cpol: true
+
required:
- compatible
- port
diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml
index 678cee68b52a..655713fba7e2 100644
--- a/Documentation/devicetree/bindings/spi/spi-controller.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml
@@ -95,6 +95,17 @@ patternProperties:
type: object
$ref: spi-peripheral-props.yaml

+ properties:
+ spi-cpha:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ The device requires shifted clock phase (CPHA) mode.
+
+ spi-cpol:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ The device requires inverse clock polarity (CPOL) mode.
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
index 5e32928c4fc3..2349f83c07f3 100644
--- a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
@@ -34,16 +34,6 @@ properties:
description:
The device requires 3-wire mode.

- spi-cpha:
- $ref: /schemas/types.yaml#/definitions/flag
- description:
- The device requires shifted clock phase (CPHA) mode.
-
- spi-cpol:
- $ref: /schemas/types.yaml#/definitions/flag
- description:
- The device requires inverse clock polarity (CPOL) mode.
-
spi-cs-high:
$ref: /schemas/types.yaml#/definitions/flag
description:
--
2.34.1
\
 
 \ /
  Last update: 2022-07-22 21:16    [W:0.312 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site