Messages in this thread Patch in this message | | | From | Krzysztof Kozlowski <> | Subject | [PATCH 2/6] dt-bindings: eeprom: at25: explicitly list SPI CPHA and CPOL | Date | Thu, 21 Jul 2022 17:31:51 +0200 |
| |
The spi-cpha and spi-cpol properties are device specific and should be accepted only if device really needs them. Explicitly list them in device bindings in preparation of their removal from generic spi-peripheral-props.yaml schema.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- Documentation/devicetree/bindings/eeprom/at25.yaml | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/eeprom/at25.yaml b/Documentation/devicetree/bindings/eeprom/at25.yaml index fbf99e346966..64666624b6aa 100644 --- a/Documentation/devicetree/bindings/eeprom/at25.yaml +++ b/Documentation/devicetree/bindings/eeprom/at25.yaml @@ -65,9 +65,15 @@ properties: For 9 bits, the MSB of the address is sent as bit 3 of the instruction byte, before the address byte. - spi-cpha: true + spi-cpha: + type: boolean + description: + The device requires shifted clock phase (CPHA) mode. - spi-cpol: true + spi-cpol: + type: boolean + description: + The device requires inverse clock polarity (CPOL) mode. read-only: description: -- 2.34.1
| |