lkml.org 
[lkml]   [2022]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v16 0/3] eDP/DP Phy vdda realted function
Hi,

On Thu, Jul 21, 2022 at 4:20 AM Mark Brown <broonie@kernel.org> wrote:
>
> On Thu, Jul 21, 2022 at 12:31:41PM +0200, Johan Hovold wrote:
>
> If you're copying someone into a thread that's not obviously relevant
> for them it's good practice to put a note about it at the top of the
> mail to reduce the chances that it just gets deleted unread - people get
> copies of all sorts of random stuff for not great reasons (like getting
> pulled in by checkpatch due to once having done a cleanup) and are often
> quicky to delete things.
>
> > This series breaks USB and PCIe for some SC8280XP and SA540P machines
> > where the DP PHY regulators are shared with other PHYs whose drivers do
> > not request a load.
>
> > Specifically, the hard-coded vdda-phy load of 21.8 mA added by this
> > series, causes several RPMh regulators to now be put in low-power mode.
>
> > I found Doug's suggestion to handle situations like this in regulator
> > core:
> >
> > https://lore.kernel.org/all/20180814170617.100087-1-dianders@chromium.org/
>
> > but since that was rejected, how do we deal with this generally?
>
> > In the above thread Doug mentioned adding support for load requests to
> > further drivers and Bjorn mentioned working around it by adding
> > regulator-system-load properties to DT.
>
> > It seems quite likely that changes like this one affects other systems
> > too, and the effects may be hard to debug. So a more general solution
> > than playing whack-a-mole using DT would be good to have.
>
> You could add a way to specify constant base loads in DT on either a per
> regulator or per consumer basis.

Yes, this please! ...on a per consumer basis. :-) It's been on my
wishlist for a while and would eliminate a massive amount of code /
tables in the drivers.

We could debate syntax, but I guess you'd either do it w/ two cells

vdda-phy-supply = <&vdda_mipi_dsi0_1p2 21800>;

...or with matching properties:

vdda-phy-supply = <&vdda_mipi_dsi0_1p2>;
vdda-phy-supply-base-load = <21800>;

-Doug

\
 
 \ /
  Last update: 2022-07-21 16:42    [W:0.133 / U:0.384 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site