lkml.org 
[lkml]   [2022]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 3/6] usb: typec: tcpci_rt1711h: Add regulator support when source vbus
From
On 7/20/22 23:11, Gene Chen wrote:
> From: Gene Chen <gene_chen@richtek.com>
>
> Add regulator support when source vbus
>
> Signed-off-by: Gene Chen <gene_chen@richtek.com>
> ---
> drivers/usb/typec/tcpm/tcpci_rt1711h.c | 28 ++++++++++++++++++++++++++
> 1 file changed, 28 insertions(+)
>
> diff --git a/drivers/usb/typec/tcpm/tcpci_rt1711h.c b/drivers/usb/typec/tcpm/tcpci_rt1711h.c
> index 3309ceace2b2..52c9594e531d 100644
> --- a/drivers/usb/typec/tcpm/tcpci_rt1711h.c
> +++ b/drivers/usb/typec/tcpm/tcpci_rt1711h.c
> @@ -10,6 +10,7 @@
> #include <linux/i2c.h>
> #include <linux/interrupt.h>
> #include <linux/gpio/consumer.h>
> +#include <linux/regulator/consumer.h>
> #include <linux/usb/tcpm.h>
> #include <linux/regmap.h>
> #include "tcpci.h"
> @@ -40,6 +41,8 @@ struct rt1711h_chip {
> struct tcpci_data data;
> struct tcpci *tcpci;
> struct device *dev;
> + struct regulator *vbus;
> + bool src_en;
> };
>
> static int rt1711h_read16(struct rt1711h_chip *chip, unsigned int reg, u16 *val)
> @@ -103,6 +106,26 @@ static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata)
>
> /* dcSRC.DRP : 33% */
> return rt1711h_write16(chip, RT1711H_RTCTRL16, 330);
> +
> +}
> +
> +static int rt1711h_set_vbus(struct tcpci *tcpci, struct tcpci_data *tdata,
> + bool src, bool snk)
> +{
> + struct rt1711h_chip *chip = tdata_to_rt1711h(tdata);
> + int ret;
> +
> + if (chip->src_en == src)
> + return 1;
> +
> + if (src)
> + ret = regulator_enable(chip->vbus);
> + else
> + ret = regulator_disable(chip->vbus);
> +
> + if (!ret)
> + chip->src_en = src;
> + return ret ? ret : 1;

Are you sure this is what you want ? Returning 1 bypasses the code setting
the vbus registers in tcpci.c. If that is on purpose it might make sense
to explain it.

> }
>
> static int rt1711h_set_vconn(struct tcpci *tcpci, struct tcpci_data *tdata,
> @@ -246,7 +269,12 @@ static int rt1711h_probe(struct i2c_client *client,
> if (ret < 0)
> return ret;
>
> + chip->vbus = devm_regulator_get(&client->dev, "vbus");
> + if (IS_ERR(chip->vbus))
> + return PTR_ERR(chip->vbus);
> +

This makes regulator support mandatory, which so far was not the case.
That warrants an explanation why it is not a problem for existing users.

Thanks,
Guenter

> chip->data.init = rt1711h_init;
> + chip->data.set_vbus = rt1711h_set_vbus;
> chip->data.set_vconn = rt1711h_set_vconn;
> chip->data.start_drp_toggling = rt1711h_start_drp_toggling;
> chip->tcpci = tcpci_register_port(chip->dev, &chip->data);

\
 
 \ /
  Last update: 2022-07-21 16:30    [W:0.858 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site