Messages in this thread Patch in this message | | | From | Judy Hsiao <> | Subject | [PATCH v4 1/3] arm64: dts: qcom: sc7280: herobrine: Add pinconf settings for mi2s1 | Date | Thu, 21 Jul 2022 08:38:47 +0000 |
| |
1. Add drive strength property for mi2s1 on sc7280 based platforms. 2. Disable the pull-up for mi2s1 lines.
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> --- arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi index 57bacca6c5e1..67874749f1a8 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi @@ -632,6 +632,21 @@ &dp_hot_plug_det { bias-disable; }; +&mi2s1_data0 { + drive-strength = <6>; + bias-disable; +}; + +&mi2s1_sclk { + drive-strength = <6>; + bias-disable; +}; + +&mi2s1_ws { + drive-strength = <6>; + bias-disable; +}; + &pcie1_clkreq_n { bias-pull-up; drive-strength = <2>; -- 2.37.0.170.g444d1eabd0-goog
| |