lkml.org 
[lkml]   [2022]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 1/3] dt-bindings: usb: typec: add bindings for stm32g0 controller
On Wed, 13 Jul 2022 14:08:40 +0200, Fabrice Gasnier wrote:
> Add DT schema documentation for the STM32G0 Type-C PD (Power Delivery)
> controller.
> STM32G0 provides an integrated USB Type-C and power delivery interface.
> It can be programmed with a firmware to handle UCSI protocol over I2C
> interface. A GPIO is used as an interrupt line.
> It may be used as a wakeup source, so use optional "wakeup-source" and
> "power-domains" properties to support wakeup.
> The firmware itself may be flashed or later updated (optional). Choice is
> let to the application to allow firmware update. A default firmware could
> be already programmed in production and be customized (to not allow it).
> So the firmware-name is made optional to represent this option.
>
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
> ---
> Changes in v3:
> - Add connector to the required properties as pointed out by Krzysztof.
> Update commit message to explain why the firmware-name is optional.
> Changes in v2:
> - Krzysztof's review comments: update commit message, use ports, use
> unevaluatedProperties: false for usb-connector schema, define maxItems
> for power-domains, adopt generic node names, remove quotes
> ---
> .../bindings/usb/st,typec-stm32g0.yaml | 91 +++++++++++++++++++
> 1 file changed, 91 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/usb/st,typec-stm32g0.yaml
>

Reviewed-by: Rob Herring <robh@kernel.org>

\
 
 \ /
  Last update: 2022-07-22 02:26    [W:0.137 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site