lkml.org 
[lkml]   [2022]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 4/5] usb: dwc3: Allow end transfer commands to be sent during soft disconnect
From
Hi Thinh,

On 7/21/2022 3:08 PM, Thinh Nguyen wrote:
> Hi Wesley,
>
> On 7/12/2022, Wesley Cheng wrote:
>> If soft disconnect is in progress, allow the endxfer command to be sent,
>> without this, there is an issue where the stop active transfer call
>> (during pullup disable) wouldn't actually issue the endxfer command,
>> while clearing the DEP flag.
>>
>> In addition, if the DWC3_EP_DELAY_STOP flag was set before soft disconnect
>> started (i.e. from the dequeue path), ensure that when the EP0 transaction
>> completes during soft disconnect, to issue the endxfer with the force
>> parameter set, as it does not expect a command complete event.
>>
>> Fixes: e4cf6580ac740 ("usb: dwc3: gadget: Wait for ep0 xfers to complete during dequeue")
>> Suggested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
>> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
>> ---
>> Link:
>> https://urldefense.com/v3/__https://lore.kernel.org/linux-usb/1a1a5485-790e-79ce-f5a6-1e96d9b49a47@synopsys.com/__;!!A4F2R9G_pg!cXW2TlALYWnXNPg-NoMFUrQ8K1egEZiQizZ5CA1DOM1Gcw4tfOULy-_2eMGvL8pQPte5dScFON-0wxH2eXu8ijEQUbs$
>>
>> drivers/usb/dwc3/ep0.c | 3 +--
>> drivers/usb/dwc3/gadget.c | 5 ++++-
>> 2 files changed, 5 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
>> index 506ef717fdc0..5851b0e9db0a 100644
>> --- a/drivers/usb/dwc3/ep0.c
>> +++ b/drivers/usb/dwc3/ep0.c
>> @@ -290,8 +290,7 @@ void dwc3_ep0_out_start(struct dwc3 *dwc)
>> if (!(dwc3_ep->flags & DWC3_EP_DELAY_STOP))
>> continue;
>>
>> - dwc3_ep->flags &= ~DWC3_EP_DELAY_STOP;
>
> If we don't clear this flag here,
>

This is why I added the dwc->connected argument to control the
"interrupt" argument.

>> - dwc3_stop_active_transfer(dwc3_ep, true, true);
>> + dwc3_stop_active_transfer(dwc3_ep, true, dwc->connected);
>> }
>> }
>>
>> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
>> index ee85b773e3fe..41b7007358de 100644
>> --- a/drivers/usb/dwc3/gadget.c
>> +++ b/drivers/usb/dwc3/gadget.c
>> @@ -1693,6 +1693,7 @@ static int __dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force, bool int
>> dep->flags &= ~DWC3_EP_TRANSFER_STARTED;
>> else if (!ret)
>> dep->flags |= DWC3_EP_END_TRANSFER_PENDING;
>> + dep->flags &= ~DWC3_EP_DELAY_STOP;
>>
>> return ret;
>> }
>> @@ -3686,8 +3687,10 @@ void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force,
>> if (dep->number <= 1 && dwc->ep0state != EP0_DATA_PHASE)
>> return;
>>
>> + if (interrupt && (dep->flags & DWC3_EP_DELAY_STOP))
>> + return;
>> +
>
> then it may not go through here. I think I made this same mistake in my
> previous suggestion.
>

Since dwc->connected is set to FALSE before we call stop active
transfers, if we ever run into a situation where delayed stop is set
already, then it should go through.

Thanks
Wesley Cheng

\
 
 \ /
  Last update: 2022-07-22 00:15    [W:0.062 / U:0.660 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site