lkml.org 
[lkml]   [2022]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    SubjectRe: [RFC PATCH net-next 0/9] net: pcs: Add support for devices probed in the "usual" manner
    From
    Date


    On 7/20/22 9:53 AM, Vladimir Oltean wrote:
    > On Tue, Jul 19, 2022 at 03:34:45PM -0400, Sean Anderson wrote:
    >> We could do it, but it'd be a pretty big hack. Something like the
    >> following. Phylink would need to be modified to grab the lock before
    >> every op and check if the PCS is dead or not. This is of course still
    >> not optimal, since there's no way to re-attach a PCS once it goes away.
    >
    > You assume it's just phylink who operates on a PCS structure, but if you
    > include your search pool to also cover include/linux/pcs/pcs-xpcs.h,
    > you'll see a bunch of exported functions which are called directly by
    > the client drivers (stmmac, sja1105). At this stage it gets pretty hard
    > to validate that drivers won't attempt from any code path to do
    > something stupid with a dead PCS. All in all it creates an environment
    > with insanely weak guarantees; that's pretty hard to get behind IMO.

    Right. To do this properly, we'd need wrapper functions for all the PCS
    operations. And the super-weak guarantees is why I referred to this as a
    "hack". But we could certainly make it so that removing a PCS might not
    bring down the MAC.

    >> IMO a better solution is to use devlink and submit a patch to add
    >> notifications which the MAC driver can register for. That way it can
    >> find out when the PCS goes away and potentially do something about it
    >> (or just let itself get removed).
    >
    > Not sure I understand what connection there is between devlink (device
    > links) and PCS {de}registration notifications.

    The default action when a supplier is going to be removed is to remove
    the consumers. However, it'd be nice to notify the consumer beforehand.
    If we used device links, this would need to be integrated (since otherwise
    we'd only find out that a PCS was gone after the MAC was gone too).

    > We could probably add those
    > notifications without any intervention from the device core: we would
    > just need to make this new PCS "core" to register an blocking_notifier_call_chain
    > to which interested drivers could add their notifier blocks. How a> certain phylink user is going to determine that "hey, this PCS is
    > definitely mine and I can use it" is an open question. In any case, my
    > expectation is that we have a notifier chain, we can at least continue
    > operating (avoid unbinding the struct device), but essentially move our
    > phylink_create/phylink_destroy calls to within those notifier blocks.
    > Again, retrofitting this model to existing drivers, phylink API (and
    > maybe even its internal structure) is something that's hard to hop on
    > board of; I think it's a solution waiting for a problem, and I don't
    > have an interest to develop or even review it.

    I don't either. I'd much rather just bring down the whole MAC when any
    PCS gets removed. Whatever we decide on doing here should also be done
    for (serdes) phys as well, since they have all the same pitfalls. For
    that reason I'd rather use a generic, non-intrusive solution like device
    links. I know Russell mentioned composite devices, but I think those
    would have similar advantages/drawbacks as a device-link-based solution
    (unbinding of one device unbinds the rest).

    --Sean

    \
     
     \ /
      Last update: 2022-07-21 23:45    [W:3.303 / U:0.008 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site