lkml.org 
[lkml]   [2022]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 08/11] net: phylink: Adjust advertisement based on rate adaptation
On Thu, Jul 21, 2022 at 11:42 AM Andrew Lunn <andrew@lunn.ch> wrote:
>
> > I guess it would depend on the structure of the PHY - whether the PHY
> > is structured similar to a two port switch internally, having a MAC
> > facing the host and another MAC facing the media side. (I believe this
> > is exactly how the MACSEC versions of the 88x3310 are structured.)
> >
> > If you don't have that kind of structure, then I would guess that doing
> > duplex adaption could be problematical.
>
> If you don't have that sort of structure, i think rate adaptation
> would have problems in general. Pause is not very fine grained. You
> need to somehow buffer packets because what comes from the MAC is
> likely to be bursty. And when that buffer overflows, you want to be
> selective about what you throw away. You want ARP, OSPF and other
> signalling packets to have priority, and user data gets
> tossed. Otherwise your network collapses.

Most of our protocols (like arp) are tolerant of some loss and taking
extraordinary measures to preserve "signalling" packets shouldn't be
necessary.

That said, how much buffering can exist here? How much latency between
emission, receipt, and response to a pause will there be?

>
> Andrew



--
FQ World Domination pending: https://blog.cerowrt.org/post/state_of_fq_codel/
Dave Täht CEO, TekLibre, LLC

\
 
 \ /
  Last update: 2022-07-21 21:03    [W:0.650 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site