lkml.org 
[lkml]   [2022]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 1/3] Bluetooth: hci_sync: Remove HCI_QUIRK_BROKEN_ERR_DATA_REPORTING
Date
Check feature bit "Erroneous Data Reporting" instead of quirk
HCI_QUIRK_BROKEN_ERR_DATA_REPORTING to decide if HCI command
HCI_Read|Write_Default_Erroneous_Data_Reporting work fine.

BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 2, Part C | page 587
This feature indicates whether the device is able to support the
Packet_Status_Flag and the HCI commands HCI_Write_Default_-
Erroneous_Data_Reporting and HCI_Read_Default_Erroneous_-
Data_Reporting.

ALL BT controller whose device driver set the quirk currently does not
enable the fearture bit as shown by below btmon log:

@ RAW Open: hcitool (privileged) version 2.22
< HCI Command: Read Local Supported Commands (0x04|0x0002) plen 0
> HCI Event: Command Complete (0x0e) plen 68
Read Local Supported Commands (0x04|0x0002) ncmd 1
Status: Success (0x00)
Commands: 288 entries
......
Read Default Erroneous Data Reporting (Octet 18 - Bit 2)
Write Default Erroneous Data Reporting (Octet 18 - Bit 3)
......

< HCI Command: Read Default Erroneous Data Reporting (0x03|0x005a) plen 0
> HCI Event: Command Complete (0x0e) plen 4
Read Default Erroneous Data Reporting (0x03|0x005a) ncmd 1
Status: Unknown HCI Command (0x01)

< HCI Command: Read Local Supported Features (0x04|0x0003) plen 0
> HCI Event: Command Complete (0x0e) plen 12
Read Local Supported Features (0x04|0x0003) ncmd 1
Status: Success (0x00)
Features: 0xff 0xfe 0x0f 0xfe 0xd8 0x3f 0x5b 0x87
3 slot packets
......

Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Tested-by: Zijun Hu <quic_zijuhu@quicinc.com>
---
include/net/bluetooth/hci.h | 12 +-----------
net/bluetooth/hci_sync.c | 7 ++-----
2 files changed, 3 insertions(+), 16 deletions(-)

diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index 4a45c48eb0d2..927f51b92854 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -228,17 +228,6 @@ enum {
*/
HCI_QUIRK_VALID_LE_STATES,

- /* When this quirk is set, then erroneous data reporting
- * is ignored. This is mainly due to the fact that the HCI
- * Read Default Erroneous Data Reporting command is advertised,
- * but not supported; these controllers often reply with unknown
- * command and tend to lock up randomly. Needing a hard reset.
- *
- * This quirk can be set before hci_register_dev is called or
- * during the hdev->setup vendor callback.
- */
- HCI_QUIRK_BROKEN_ERR_DATA_REPORTING,
-
/*
* When this quirk is set, then the hci_suspend_notifier is not
* registered. This is intended for devices which drop completely
@@ -497,6 +486,7 @@ enum {
#define LMP_EXT_INQ 0x01
#define LMP_SIMUL_LE_BR 0x02
#define LMP_SIMPLE_PAIR 0x08
+#define LMP_ERR_DATA_REPORTING 0x20
#define LMP_NO_FLUSH 0x40

#define LMP_LSTO 0x01
diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c
index 464a5e2c56fb..0b6987b37c03 100644
--- a/net/bluetooth/hci_sync.c
+++ b/net/bluetooth/hci_sync.c
@@ -3221,7 +3221,7 @@ static int hci_read_page_scan_activity_sync(struct hci_dev *hdev)
static int hci_read_def_err_data_reporting_sync(struct hci_dev *hdev)
{
if (!(hdev->commands[18] & 0x04) ||
- test_bit(HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, &hdev->quirks))
+ !(hdev->features[0][6] & LMP_ERR_DATA_REPORTING))
return 0;

return __hci_cmd_sync_status(hdev, HCI_OP_READ_DEF_ERR_DATA_REPORTING,
@@ -3706,7 +3706,7 @@ static int hci_set_err_data_report_sync(struct hci_dev *hdev)
bool enabled = hci_dev_test_flag(hdev, HCI_WIDEBAND_SPEECH_ENABLED);

if (!(hdev->commands[18] & 0x08) ||
- test_bit(HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, &hdev->quirks))
+ !(hdev->features[0][6] & LMP_ERR_DATA_REPORTING))
return 0;

if (enabled == hdev->err_data_reporting)
@@ -3865,9 +3865,6 @@ static const struct {
HCI_QUIRK_BROKEN(STORED_LINK_KEY,
"HCI Delete Stored Link Key command is advertised, "
"but not supported."),
- HCI_QUIRK_BROKEN(ERR_DATA_REPORTING,
- "HCI Read Default Erroneous Data Reporting command is "
- "advertised, but not supported."),
HCI_QUIRK_BROKEN(READ_TRANSMIT_POWER,
"HCI Read Transmit Power Level command is advertised, "
"but not supported."),
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
\
 
 \ /
  Last update: 2022-07-20 16:08    [W:0.058 / U:0.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site