lkml.org 
[lkml]   [2022]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 03/21] dt-bindings: power: mediatek: Refine multiple level power domain nodes
Date
Extract duplicated properties and support more levels of power
domain nodes.

This change fix following error when do dtbs_check,
arch/arm64/boot/dts/mediatek/mt8195-evb.dtb: power-controller: power-domain@15:power-domain@16:power-domain@18: 'power-domain@19', 'power-domain@20', 'power-domain@21' do not match any of the regexes: 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/power/mediatek,power-controller.yaml

Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
---
.../power/mediatek,power-controller.yaml | 131 +++---------------
1 file changed, 17 insertions(+), 114 deletions(-)

diff --git a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
index b448101fac43..321802c95308 100644
--- a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
+++ b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
@@ -42,6 +42,23 @@ properties:

patternProperties:
"^power-domain@[0-9a-f]+$":
+ $ref: "#/$defs/power-domain-node"
+ patternProperties:
+ "^power-domain@[0-9a-f]+$":
+ $ref: "#/$defs/power-domain-node"
+ patternProperties:
+ "^power-domain@[0-9a-f]+$":
+ $ref: "#/$defs/power-domain-node"
+ patternProperties:
+ "^power-domain@[0-9a-f]+$":
+ $ref: "#/$defs/power-domain-node"
+ unevaluatedProperties: false
+ unevaluatedProperties: false
+ unevaluatedProperties: false
+ unevaluatedProperties: false
+
+$defs:
+ power-domain-node:
type: object
description: |
Represents the power domains within the power controller node as documented
@@ -100,123 +117,9 @@ patternProperties:
$ref: /schemas/types.yaml#/definitions/phandle
description: phandle to the device containing the SMI register range.

- patternProperties:
- "^power-domain@[0-9a-f]+$":
- type: object
- description: |
- Represents a power domain child within a power domain parent node.
-
- properties:
-
- '#power-domain-cells':
- description:
- Must be 0 for nodes representing a single PM domain and 1 for nodes
- providing multiple PM domains.
-
- '#address-cells':
- const: 1
-
- '#size-cells':
- const: 0
-
- reg:
- maxItems: 1
-
- clocks:
- description: |
- A number of phandles to clocks that need to be enabled during domain
- power-up sequencing.
-
- clock-names:
- description: |
- List of names of clocks, in order to match the power-up sequencing
- for each power domain we need to group the clocks by name. BASIC
- clocks need to be enabled before enabling the corresponding power
- domain, and should not have a '-' in their name (i.e mm, mfg, venc).
- SUSBYS clocks need to be enabled before releasing the bus protection,
- and should contain a '-' in their name (i.e mm-0, isp-0, cam-0).
-
- In order to follow properly the power-up sequencing, the clocks must
- be specified by order, adding first the BASIC clocks followed by the
- SUSBSYS clocks.
-
- domain-supply:
- description: domain regulator supply.
-
- mediatek,infracfg:
- $ref: /schemas/types.yaml#/definitions/phandle
- description: phandle to the device containing the INFRACFG register range.
-
- mediatek,smi:
- $ref: /schemas/types.yaml#/definitions/phandle
- description: phandle to the device containing the SMI register range.
-
- patternProperties:
- "^power-domain@[0-9a-f]+$":
- type: object
- description: |
- Represents a power domain child within a power domain parent node.
-
- properties:
-
- '#power-domain-cells':
- description:
- Must be 0 for nodes representing a single PM domain and 1 for nodes
- providing multiple PM domains.
-
- '#address-cells':
- const: 1
-
- '#size-cells':
- const: 0
-
- reg:
- maxItems: 1
-
- clocks:
- description: |
- A number of phandles to clocks that need to be enabled during domain
- power-up sequencing.
-
- clock-names:
- description: |
- List of names of clocks, in order to match the power-up sequencing
- for each power domain we need to group the clocks by name. BASIC
- clocks need to be enabled before enabling the corresponding power
- domain, and should not have a '-' in their name (i.e mm, mfg, venc).
- SUSBYS clocks need to be enabled before releasing the bus protection,
- and should contain a '-' in their name (i.e mm-0, isp-0, cam-0).
-
- In order to follow properly the power-up sequencing, the clocks must
- be specified by order, adding first the BASIC clocks followed by the
- SUSBSYS clocks.
-
- domain-supply:
- description: domain regulator supply.
-
- mediatek,infracfg:
- $ref: /schemas/types.yaml#/definitions/phandle
- description: phandle to the device containing the INFRACFG register range.
-
- mediatek,smi:
- $ref: /schemas/types.yaml#/definitions/phandle
- description: phandle to the device containing the SMI register range.
-
- required:
- - reg
-
- additionalProperties: false
-
- required:
- - reg
-
- additionalProperties: false
-
required:
- reg

- additionalProperties: false
-
required:
- compatible

--
2.18.0
\
 
 \ /
  Last update: 2022-07-20 14:32    [W:0.449 / U:0.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site