lkml.org 
[lkml]   [2022]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 02/21] dt-bindings: memory: mediatek: Update condition for mt8195 smi node
Date
The max clock items for the dts node with compatible
'mediatek,mt8195-smi-sub-common' should be 3.

However, the dtbs_check of such node will get following message,
arch/arm64/boot/dts/mediatek/mt8195-evb.dtb: smi@14010000: clock-names: ['apb', 'smi', 'gals0'] is too long
From schema: Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml

It's because the 'mediatek,mt8195-smi-sub-common' compatible incorrectly
matches the 'else' conditions for gen2 HW without gals.

Rewrite the 'else' condition to specifically identify the compatibles
that utilizing gen2 HW without gals.

Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../memory-controllers/mediatek,smi-common.yaml | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
index 71bc5cefb49c..4f5dd0a20109 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
@@ -144,7 +144,16 @@ allOf:
- const: gals0
- const: gals1

- else: # for gen2 HW that don't have gals
+ - if: # for gen2 HW that don't have gals
+ properties:
+ compatible:
+ enum:
+ - mediatek,mt2712-smi-common
+ - mediatek,mt6795-smi-common
+ - mediatek,mt8167-smi-common
+ - mediatek,mt8173-smi-common
+
+ then:
properties:
clocks:
minItems: 2
--
2.18.0
\
 
 \ /
  Last update: 2022-07-20 14:31    [W:0.195 / U:1.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site