lkml.org 
[lkml]   [2022]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 7/9] habanalabs: fix spelling mistakes
Date
From: Bharat Jauhari <bjauhari@habana.ai>

Cosmetic commit, no logical changes. It just fixes the spelling
mistakes.

Signed-off-by: Bharat Jauhari <bjauhari@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
---
drivers/misc/habanalabs/common/firmware_if.c | 8 +++---
drivers/misc/habanalabs/common/habanalabs.h | 27 ++++++++++----------
drivers/misc/habanalabs/common/memory_mgr.c | 10 ++++----
include/uapi/misc/habanalabs.h | 10 ++++----
4 files changed, 27 insertions(+), 28 deletions(-)

diff --git a/drivers/misc/habanalabs/common/firmware_if.c b/drivers/misc/habanalabs/common/firmware_if.c
index 608ca67527a5..58c1eff16df6 100644
--- a/drivers/misc/habanalabs/common/firmware_if.c
+++ b/drivers/misc/habanalabs/common/firmware_if.c
@@ -1514,7 +1514,7 @@ int hl_fw_read_preboot_status(struct hl_device *hdev)
hdev->asic_funcs->init_firmware_preload_params(hdev);

/*
- * In order to determine boot method (static VS dymanic) we need to
+ * In order to determine boot method (static VS dynamic) we need to
* read the boot caps register
*/
rc = hl_fw_read_preboot_caps(hdev);
@@ -1781,7 +1781,7 @@ int hl_fw_dynamic_send_protocol_cmd(struct hl_device *hdev,
*
* @return the CRC32 result
*
- * NOTE: kernel's CRC32 differ's from standard CRC32 calculation.
+ * NOTE: kernel's CRC32 differs from standard CRC32 calculation.
* in order to be aligned we need to flip the bits of both the input
* initial CRC and kernel's CRC32 result.
* in addition both sides use initial CRC of 0,
@@ -1798,7 +1798,7 @@ static u32 hl_fw_compat_crc32(u8 *data, size_t size)
*
* @hdev: pointer to the habanalabs device structure
* @addr: device address of memory transfer
- * @size: memory transter size
+ * @size: memory transfer size
* @region: PCI memory region
*
* @return 0 on success, otherwise non-zero error code
@@ -2547,7 +2547,7 @@ static int hl_fw_dynamic_init_cpu(struct hl_device *hdev,
/*
* when testing FW load (without Linux) on PLDM we don't want to
* wait until boot fit is active as it may take several hours.
- * instead, we load the bootfit and let it do all initializations in
+ * instead, we load the bootfit and let it do all initialization in
* the background.
*/
if (hdev->pldm && !(hdev->fw_components & FW_TYPE_LINUX))
diff --git a/drivers/misc/habanalabs/common/habanalabs.h b/drivers/misc/habanalabs/common/habanalabs.h
index 8c2c94fb1322..350bc5b9f174 100644
--- a/drivers/misc/habanalabs/common/habanalabs.h
+++ b/drivers/misc/habanalabs/common/habanalabs.h
@@ -94,7 +94,7 @@ struct hl_fpriv;
#define MMU_HASH_TABLE_BITS 7 /* 1 << 7 buckets */

/**
- * enum hl_mmu_page_table_locaion - mmu page table location
+ * enum hl_mmu_page_table_location - mmu page table location
* @MMU_DR_PGT: page-table is located on device DRAM.
* @MMU_HR_PGT: page-table is located on host memory.
* @MMU_NUM_PGT_LOCATIONS: number of page-table locations currently supported.
@@ -800,7 +800,7 @@ struct hl_fence {
* @lock: spinlock to protect fence.
* @hdev: habanalabs device structure.
* @hw_sob: the H/W SOB used in this signal/wait CS.
- * @encaps_sig_hdl: encaps signals hanlder.
+ * @encaps_sig_hdl: encaps signals handler.
* @cs_seq: command submission sequence number.
* @type: type of the CS - signal/wait.
* @sob_val: the SOB value that is used in this signal/wait CS.
@@ -908,7 +908,7 @@ struct hl_mmap_mem_buf {
* @size: holds the CB's size.
* @cs_cnt: holds number of CS that this CB participates in.
* @is_pool: true if CB was acquired from the pool, false otherwise.
- * @is_internal: internaly allocated
+ * @is_internal: internally allocated
* @is_mmu_mapped: true if the CB is mapped to the device's MMU.
*/
struct hl_cb {
@@ -1116,7 +1116,7 @@ struct timestamp_reg_info {
* @fence: hl fence object for interrupt completion
* @cq_target_value: CQ target value
* @cq_kernel_addr: CQ kernel address, to be used in the cq interrupt
- * handler for taget value comparison
+ * handler for target value comparison
*/
struct hl_user_pending_interrupt {
struct timestamp_reg_info ts_reg_info;
@@ -1742,10 +1742,10 @@ struct hl_cs_outcome {

/**
* struct hl_cs_outcome_store - represents a limited store of completed CS outcomes
- * @outcome_map: index of completed CS searcheable by sequence number
+ * @outcome_map: index of completed CS searchable by sequence number
* @used_list: list of outcome objects currently in use
* @free_list: list of outcome objects currently not in use
- * @nodes_pool: a static pool of preallocated outcome objects
+ * @nodes_pool: a static pool of pre-allocated outcome objects
* @db_lock: any operation on the store must take this lock
*/
struct hl_cs_outcome_store {
@@ -1769,7 +1769,7 @@ struct hl_cs_outcome_store {
* @refcount: reference counter for the context. Context is released only when
* this hits 0l. It is incremented on CS and CS_WAIT.
* @cs_pending: array of hl fence objects representing pending CS.
- * @outcome_store: storage data structure used to remember ouitcomes of completed
+ * @outcome_store: storage data structure used to remember outcomes of completed
* command submissions for a long time after CS id wraparound.
* @va_range: holds available virtual addresses for host and dram mappings.
* @mem_hash_lock: protects the mem_hash.
@@ -1838,7 +1838,6 @@ struct hl_ctx_mgr {
};


-
/*
* COMMAND SUBMISSIONS
*/
@@ -1904,7 +1903,7 @@ struct hl_userptr {
* @tdr_active: true if TDR was activated for this CS (to prevent
* double TDR activation).
* @aborted: true if CS was aborted due to some device error.
- * @timestamp: true if a timestmap must be captured upon completion.
+ * @timestamp: true if a timestamp must be captured upon completion.
* @staged_last: true if this is the last staged CS and needs completion.
* @staged_first: true if this is the first staged CS and we need to receive
* timeout for this CS.
@@ -2229,7 +2228,7 @@ struct hl_info_list {

/**
* struct hl_debugfs_entry - debugfs dentry wrapper.
- * @info_ent: dentry realted ops.
+ * @info_ent: dentry related ops.
* @dev_entry: ASIC specific debugfs manager.
*/
struct hl_debugfs_entry {
@@ -2934,7 +2933,7 @@ struct razwi_info {
* struct undefined_opcode_info - info about last undefined opcode error
* @timestamp: timestamp of the undefined opcode error
* @cb_addr_streams: CB addresses (per stream) that are currently exists in the PQ
- * entiers. In case all streams array entries are
+ * entries. In case all streams array entries are
* filled with values, it means the execution was in Lower-CP.
* @cq_addr: the address of the current handled command buffer
* @cq_size: the size of the current handled command buffer
@@ -2975,7 +2974,7 @@ struct last_error_session_info {
/**
* struct hl_reset_info - holds current device reset information.
* @lock: lock to protect critical reset flows.
- * @compute_reset_cnt: number of compte resets since the driver was loaded.
+ * @compute_reset_cnt: number of compute resets since the driver was loaded.
* @hard_reset_cnt: number of hard resets since the driver was loaded.
* @hard_reset_schedule_flags: hard reset is scheduled to after current compute reset,
* here we hold the hard reset flags.
@@ -2986,7 +2985,7 @@ struct last_error_session_info {
* @hard_reset_pending: is there a hard reset work pending.
* @curr_reset_cause: saves an enumerated reset cause when a hard reset is
* triggered, and cleared after it is shared with preboot.
- * @prev_reset_trigger: saves the previous trigger which caused a reset, overidden
+ * @prev_reset_trigger: saves the previous trigger which caused a reset, overridden
* with a new value on next reset
* @reset_trigger_repeated: set if device reset is triggered more than once with
* same cause.
@@ -3064,7 +3063,7 @@ struct hl_reset_info {
* @hl_chip_info: ASIC's sensors information.
* @device_status_description: device status description.
* @hl_debugfs: device's debugfs manager.
- * @cb_pool: list of preallocated CBs.
+ * @cb_pool: list of pre allocated CBs.
* @cb_pool_lock: protects the CB pool.
* @internal_cb_pool_virt_addr: internal command buffer pool virtual address.
* @internal_cb_pool_dma_addr: internal command buffer pool dma address.
diff --git a/drivers/misc/habanalabs/common/memory_mgr.c b/drivers/misc/habanalabs/common/memory_mgr.c
index 56df962d2f3c..1936d653699e 100644
--- a/drivers/misc/habanalabs/common/memory_mgr.c
+++ b/drivers/misc/habanalabs/common/memory_mgr.c
@@ -11,7 +11,7 @@
* hl_mmap_mem_buf_get - increase the buffer refcount and return a pointer to
* the buffer descriptor.
*
- * @mmg: parent unifed memory manager
+ * @mmg: parent unified memory manager
* @handle: requested buffer handle
*
* Find the buffer in the store and return a pointer to its descriptor.
@@ -104,7 +104,7 @@ int hl_mmap_mem_buf_put(struct hl_mmap_mem_buf *buf)
* hl_mmap_mem_buf_put_handle - decrease the reference to the buffer with the
* given handle.
*
- * @mmg: parent unifed memory manager
+ * @mmg: parent unified memory manager
* @handle: requested buffer handle
*
* Decrease the reference to the buffer, and release it if it was the last one.
@@ -137,7 +137,7 @@ int hl_mmap_mem_buf_put_handle(struct hl_mem_mgr *mmg, u64 handle)
/**
* hl_mmap_mem_buf_alloc - allocate a new mappable buffer
*
- * @mmg: parent unifed memory manager
+ * @mmg: parent unified memory manager
* @behavior: behavior object describing this buffer polymorphic behavior
* @gfp: gfp flags to use for the memory allocations
* @args: additional args passed to behavior->alloc
@@ -222,7 +222,7 @@ static const struct vm_operations_struct hl_mmap_mem_buf_vm_ops = {
/**
* hl_mem_mgr_mmap - map the given buffer to the user
*
- * @mmg: unifed memory manager
+ * @mmg: unified memory manager
* @vma: the vma object for which mmap was closed.
* @args: additional args passed to behavior->mmap
*
@@ -322,7 +322,7 @@ void hl_mem_mgr_init(struct device *dev, struct hl_mem_mgr *mmg)
/**
* hl_mem_mgr_fini - release unified memory manager
*
- * @mmg: parent unifed memory manager
+ * @mmg: parent unified memory manager
*
* Release the unified memory manager. Shall be called from an interrupt context.
*/
diff --git a/include/uapi/misc/habanalabs.h b/include/uapi/misc/habanalabs.h
index 5d06d5c74dd1..be06b1307c44 100644
--- a/include/uapi/misc/habanalabs.h
+++ b/include/uapi/misc/habanalabs.h
@@ -876,13 +876,13 @@ struct hl_info_hw_idle {
__u32 is_idle;
/*
* Bitmask of busy engines.
- * Bits definition is according to `enum <chip>_enging_id'.
+ * Bits definition is according to `enum <chip>_engine_id'.
*/
__u32 busy_engines_mask;

/*
* Extended Bitmask of busy engines.
- * Bits definition is according to `enum <chip>_enging_id'.
+ * Bits definition is according to `enum <chip>_engine_id'.
*/
__u64 busy_engines_mask_ext[HL_BUSY_ENGINES_MASK_EXT_SIZE];
};
@@ -1078,12 +1078,12 @@ struct hl_info_razwi_event {
* struct hl_info_undefined_opcode_event - info about last undefined opcode error
* @timestamp: timestamp of the undefined opcode error
* @cb_addr_streams: CB addresses (per stream) that are currently exists in the PQ
- * entiers. In case all streams array entries are
+ * entries. In case all streams array entries are
* filled with values, it means the execution was in Lower-CP.
* @cq_addr: the address of the current handled command buffer
* @cq_size: the size of the current handled command buffer
* @cb_addr_streams_len: num of streams - actual len of cb_addr_streams array.
- * should be equal to 1 incase of undefined opcode
+ * should be equal to 1 in case of undefined opcode
* in Upper-CP (specific stream) and equal to 4 incase
* of undefined opcode in Lower-CP.
* @engine_id: engine-id that the error occurred on
@@ -1412,7 +1412,7 @@ struct hl_cs_out {

/* Valid only when HL_CS_FLAGS_RESERVE_SIGNALS_ONLY is set */
struct {
- /* This is the resereved signal handle id */
+ /* This is the reserved signal handle id */
__u32 handle_id;

/* This is the signals count */
--
2.25.1
\
 
 \ /
  Last update: 2022-07-20 13:16    [W:0.064 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site