lkml.org 
[lkml]   [2022]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [RFC PATCH v1 0/3] virtio/vsock: use SO_RCVLOWAT to set POLLIN/POLLRDNORM
Date
On 20.07.2022 12:30, Stefano Garzarella wrote:
> On Wed, Jul 20, 2022 at 06:07:47AM +0000, Arseniy Krasnov wrote:
>> On 19.07.2022 15:58, Stefano Garzarella wrote:
>>> On Mon, Jul 18, 2022 at 08:12:52AM +0000, Arseniy Krasnov wrote:
>>>> Hello,
>>>>
>>>> during my experiments with zerocopy receive, i found, that in some
>>>> cases, poll() implementation violates POSIX: when socket has non-
>>>> default SO_RCVLOWAT(e.g. not 1), poll() will always set POLLIN and
>>>> POLLRDNORM bits in 'revents' even number of bytes available to read
>>>> on socket is smaller than SO_RCVLOWAT value. In this case,user sees
>>>> POLLIN flag and then tries to read data(for example using  'read()'
>>>> call), but read call will be blocked, because  SO_RCVLOWAT logic is
>>>> supported in dequeue loop in af_vsock.c. But the same time,  POSIX
>>>> requires that:
>>>>
>>>> "POLLIN     Data other than high-priority data may be read without
>>>>            blocking.
>>>> POLLRDNORM Normal data may be read without blocking."
>>>>
>>>> See https://www.open-std.org/jtc1/sc22/open/n4217.pdf, page 293.
>>>>
>>>> So, we have, that poll() syscall returns POLLIN, but read call will
>>>> be blocked.
>>>>
>>>> Also in man page socket(7) i found that:
>>>>
>>>> "Since Linux 2.6.28, select(2), poll(2), and epoll(7) indicate a
>>>> socket as readable only if at least SO_RCVLOWAT bytes are available."
>>>>
>>>> I checked TCP callback for poll()(net/ipv4/tcp.c, tcp_poll()), it
>>>> uses SO_RCVLOWAT value to set POLLIN bit, also i've tested TCP with
>>>> this case for TCP socket, it works as POSIX required.
>>>
>>> I tried to look at the code and it seems that only TCP complies with it or am I wrong?
>> Yes, i checked AF_UNIX, it also don't care about that. It calls skb_queue_empty() that of
>> course ignores SO_RCVLOWAT.
>>>
>>>>
>>>> I've added some fixes to af_vsock.c and virtio_transport_common.c,
>>>> test is also implemented.
>>>>
>>>> What do You think guys?
>>>
>>> Nice, thanks for fixing this and for the test!
>>>
>>> I left some comments, but I think the series is fine if we will support it in all transports.
>> Ack
>>>
>>> I'd just like to understand if it's just TCP complying with it or I'm missing some check included in the socket layer that we could reuse.
>> Seems sock_poll() which is socket layer entry point for poll() doesn't contain any such checks
>>>
>>> @David, @Jakub, @Paolo, any advice?
>>>
>>> Thanks,
>>> Stefano
>>>
>>
>> PS: moreover, i found one more interesting thing with TCP and poll: TCP receive logic wakes up poll waiter
>> only when number of available bytes > SO_RCVLOWAT. E.g. it prevents "spurious" wake ups, when poll will be
>> woken up because new data arrived, but POLLIN to allow user dequeue this data won't be set(as amount of data
>> is too small).
>> See tcp_data_ready() in net/ipv4/tcp_input.c
>
> Do you mean that we should call sk->sk_data_ready(sk) checking SO_RCVLOWAT?
Yes, like tcp_data_read().
>
> It seems fine, maybe we can add vsock_data_ready() in af_vsock.c that transports should call instead of calling sk->sk_data_ready(sk) directly.
Yes, this will also update logic in vmci and hyperv transports
>
> Then we can something similar to tcp_data_ready().
>
> Thanks,
> Stefano
>

\
 
 \ /
  Last update: 2022-07-20 12:55    [W:0.883 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site