lkml.org 
[lkml]   [2022]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v9 2/2] iio: light: Add support for ltrf216a sensor
On Tue, 19 Jul 2022 14:56:51 +0300
Dmitry Osipenko <dmitry.osipenko@collabora.com> wrote:

> On 7/18/22 20:25, Jonathan Cameron wrote:
> > What turns this off again? I'd expect to see a devm_add_action_or_reset()
> > to do that in the !CONFIG_PM case.
> >
> > This is also an unusual pattern. As far as I can tell it works.
> > Normal trick for ensuring !CONFIG_PM works is to:
> >
> > 1) Unconditionally turn device on.
> > 2) Register unconditional device off devm_callback. Very rarely harmful even if device already off
> > due to runtime pm.
>
> If CONFIG_PM is disabled, do we really need to care about the power
> management on removal?
>

Best effort + in general if we do something probe(), we want to do the
reverse in remove(). Sure it's not super important, but it's a nice
to have. This tends to get 'fixed' by people revisiting the driver
after it has merged.

> > 3) Then call pm_runtime_set_active() so the state tracking matches.
>
> We can add pm_runtime_set_active() before h/w is touched for more
> consistency. On Steam Deck supplies are always enabled, but this may be
> not true for other devices.

Generally set it wherever you 'enable' the device as you are indicating
the state after that has happened. That might be really early though.

>
> > 4) Call
> > pm_runtime_mark_last_busy(dev);
> > pm_runtime_put_autosuspend(dev);
> > (here you have a function to do this anyway)
> > to let runtime_pm use same path as normal to autosuspend
> >
> > the upshot of this is that if !CONFIG_PM 3 and 4 do nothing and device
> > is left turned on. Is there something I'm missing that makes that cycle
> > inappropriate here? The main reason to do this is it then looks exactly
> > like any other runtime_pm calls elsewhere in the driver, so easier to review.
>
> It's appropriate, although caring about PM when it's disabled in kernel
> config could be unnecessary, IMO. It was my suggestion to keep the h/w
> enabled on driver's removal with !CONFIG_PM, minimizing the code.
>
For the cost of about 4-8 lines of code, I think it's worth having, but can
also see why you decided against.

Jonathan


\
 
 \ /
  Last update: 2022-07-19 14:27    [W:0.073 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site