lkml.org 
[lkml]   [2022]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [RFC Patch net-next 02/10] net: dsa: microchip: add common gigabit set and get function
    On Tue, Jul 12, 2022 at 09:33:00PM +0530, Arun Ramadoss wrote:
    > This patch add helper function for setting and getting the gigabit
    > enable for the ksz series switch. KSZ8795 switch has different register
    > address compared to all other ksz switches. KSZ8795 series uses the Port
    > 5 Interface control 6 Bit 6 for configuring the 1Gbps or 100/10Mbps
    > speed selection. All other switches uses the xMII control 1 0xN301
    > register Bit6 for gigabit.
    > Further, for KSZ8795 & KSZ9893 switches if bit 1 then 1Gbps is chosen
    > and if bit 0 then 100/10Mbps is chosen. It is other way around for
    > other switches bit 0 is for 1Gbps. So, this patch implements the common
    > function for configuring the gigabit set and get capability.
    >
    > Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
    > ---

    Reviewed-by: Vladimir Oltean <olteanv@gmail.com>

    \
     
     \ /
      Last update: 2022-07-19 12:38    [W:2.478 / U:0.272 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site