lkml.org 
[lkml]   [2022]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 1/6] dt-bindings: media: Add Allwinner A31 ISP bindings documentation
Hi Sakari,

On Sun 17 Jul 22, 11:37, Sakari Ailus wrote:
> Hi Paul,
>
> On Mon, Jul 04, 2022 at 07:35:18PM +0200, Paul Kocialkowski wrote:
> > This introduces YAML bindings documentation for the Allwinner A31 Image
> > Signal Processor (ISP).
> >
> > Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
> > Reviewed-by: Rob Herring <robh@kernel.org>
> > ---
> > .../media/allwinner,sun6i-a31-isp.yaml | 97 +++++++++++++++++++
> > 1 file changed, 97 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/media/allwinner,sun6i-a31-isp.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-isp.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-isp.yaml
> > new file mode 100644
> > index 000000000000..2fda6e05e16c
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-isp.yaml
> > @@ -0,0 +1,97 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/allwinner,sun6i-a31-isp.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Allwinner A31 Image Signal Processor Driver (ISP) Device Tree Bindings
> > +
> > +maintainers:
> > + - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - allwinner,sun6i-a31-isp
> > + - allwinner,sun8i-v3s-isp
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + clocks:
> > + items:
> > + - description: Bus Clock
> > + - description: Module Clock
> > + - description: DRAM Clock
> > +
> > + clock-names:
> > + items:
> > + - const: bus
> > + - const: mod
> > + - const: ram
> > +
> > + resets:
> > + maxItems: 1
> > +
> > + ports:
> > + $ref: /schemas/graph.yaml#/properties/ports
> > +
> > + properties:
> > + port@0:
> > + $ref: /schemas/graph.yaml#/properties/port
> > + description: CSI0 input port
> > +
> > + port@1:
> > + $ref: /schemas/graph.yaml#/properties/port
> > + description: CSI1 input port
>
> Do both support a single PHY with a single data only? If multiple data lanes
> are supported, please require data-lanes property (on endpoint).

There's actually no PHY involved here: the ISP drivers gets its video stream
from these CSI controllers which are the ones interfacing with a MIPI CSI-2
receiver (on A31/V3 it uses an external D-PHY, on A83T the D-PHY is collocated
with the controller).

So I think the data-lanes property is not relevant here.

What do you think?

Cheers,

Paul

> > +
> > + anyOf:
> > + - required:
> > + - port@0
> > + - required:
> > + - port@1
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - interrupts
> > + - clocks
> > + - clock-names
> > + - resets
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > + #include <dt-bindings/clock/sun8i-v3s-ccu.h>
> > + #include <dt-bindings/reset/sun8i-v3s-ccu.h>
> > +
> > + isp: isp@1cb8000 {
> > + compatible = "allwinner,sun8i-v3s-isp";
> > + reg = <0x01cb8000 0x1000>;
> > + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&ccu CLK_BUS_CSI>,
> > + <&ccu CLK_CSI1_SCLK>,
> > + <&ccu CLK_DRAM_CSI>;
> > + clock-names = "bus", "mod", "ram";
> > + resets = <&ccu RST_BUS_CSI>;
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@0 {
> > + reg = <0>;
> > +
> > + isp_in_csi0: endpoint {
> > + remote-endpoint = <&csi0_out_isp>;
> > + };
> > + };
> > + };
> > + };
> > +
> > +...
>
> --
> Sakari Ailus

--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2022-07-19 12:07    [W:0.060 / U:0.860 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site