lkml.org 
[lkml]   [2022]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v5 3/3] clk: qcom: lcc-ipq806x: convert to parent data
On Thu 07 Jul 19:03 CDT 2022, Christian Marangi wrote:

> Convert lcc-ipq806x driver to parent_data API.
>
> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
> ---
> v5:
> - Fix the same compilation error (don't know what the hell happen
> to my buildroot)
> v4:
> - Fix compilation error
> v3:
> - Inline pxo pll4 parent
> - Change .name from pxo to pxo_board
>
> drivers/clk/qcom/lcc-ipq806x.c | 77 ++++++++++++++++++----------------
> 1 file changed, 42 insertions(+), 35 deletions(-)
>
> diff --git a/drivers/clk/qcom/lcc-ipq806x.c b/drivers/clk/qcom/lcc-ipq806x.c
> index ba90bebba597..72d6aea5be30 100644
> --- a/drivers/clk/qcom/lcc-ipq806x.c
> +++ b/drivers/clk/qcom/lcc-ipq806x.c
> @@ -34,7 +34,9 @@ static struct clk_pll pll4 = {
> .status_bit = 16,
> .clkr.hw.init = &(struct clk_init_data){
> .name = "pll4",
> - .parent_names = (const char *[]){ "pxo" },
> + .parent_data = &(const struct clk_parent_data) {
> + .fw_name = "pxo", .name = "pxo_board",

This changes the behavior from looking for the globally named "pxo" to
look for the globally named "pxo_board", in the event that no
clock-names of "pxo" was found (based on the .fw_name).

So you probably want to keep this as .fw_name = "pxo", .name = "pxo".

> + },
> .num_parents = 1,
> .ops = &clk_pll_ops,
> },
> @@ -64,9 +66,9 @@ static const struct parent_map lcc_pxo_pll4_map[] = {
> { P_PLL4, 2 }
> };
>
> -static const char * const lcc_pxo_pll4[] = {
> - "pxo",
> - "pll4_vote",
> +static const struct clk_parent_data lcc_pxo_pll4[] = {
> + { .fw_name = "pxo", .name = "pxo" },
> + { .fw_name = "pll4_vote", .name = "pll4_vote" },

This is a reference to a clock defined in this same driver, so you can
use { .hw = &pll4_vote.clkr.hw } to avoid the lookup all together.

> };
>
> static struct freq_tbl clk_tbl_aif_mi2s[] = {
> @@ -131,18 +133,14 @@ static struct clk_rcg mi2s_osr_src = {
> .enable_mask = BIT(9),
> .hw.init = &(struct clk_init_data){
> .name = "mi2s_osr_src",
> - .parent_names = lcc_pxo_pll4,
> - .num_parents = 2,
> + .parent_data = lcc_pxo_pll4,
> + .num_parents = ARRAY_SIZE(lcc_pxo_pll4),
> .ops = &clk_rcg_ops,
> .flags = CLK_SET_RATE_GATE,
> },
> },
> };
>
> -static const char * const lcc_mi2s_parents[] = {
> - "mi2s_osr_src",
> -};
> -
> static struct clk_branch mi2s_osr_clk = {
> .halt_reg = 0x50,
> .halt_bit = 1,
> @@ -152,7 +150,9 @@ static struct clk_branch mi2s_osr_clk = {
> .enable_mask = BIT(17),
> .hw.init = &(struct clk_init_data){
> .name = "mi2s_osr_clk",
> - .parent_names = lcc_mi2s_parents,
> + .parent_hws = (const struct clk_hw*[]){
> + &mi2s_osr_src.clkr.hw,
> + },
> .num_parents = 1,
> .ops = &clk_branch_ops,
> .flags = CLK_SET_RATE_PARENT,
> @@ -167,7 +167,9 @@ static struct clk_regmap_div mi2s_div_clk = {
> .clkr = {
> .hw.init = &(struct clk_init_data){
> .name = "mi2s_div_clk",
> - .parent_names = lcc_mi2s_parents,
> + .parent_hws = (const struct clk_hw*[]){

It would be wonderful if you could keep a space between ) and { in
these.

> + &mi2s_osr_src.clkr.hw,
> + },
> .num_parents = 1,
> .ops = &clk_regmap_div_ops,
> },
> @@ -183,7 +185,9 @@ static struct clk_branch mi2s_bit_div_clk = {
> .enable_mask = BIT(15),
> .hw.init = &(struct clk_init_data){
> .name = "mi2s_bit_div_clk",
> - .parent_names = (const char *[]){ "mi2s_div_clk" },
> + .parent_hws = (const struct clk_hw*[]){
> + &mi2s_div_clk.clkr.hw,
> + },
> .num_parents = 1,
> .ops = &clk_branch_ops,
> .flags = CLK_SET_RATE_PARENT,
> @@ -191,6 +195,10 @@ static struct clk_branch mi2s_bit_div_clk = {
> },
> };
>
> +static const struct clk_parent_data lcc_mi2s_bit_div_codec_clk[] = {
> + { .hw = &mi2s_bit_div_clk.clkr.hw, },
> + { .fw_name = "mi2s_codec_clk", .name = "mi2s_codec_clk" },

Is mi2s_codec_clk and external clock? I don't see it documented in the
DT binding. And if we're introducing new clock-names, perhaps we could
skip the _clk suffix - because obviously it's a clock :)

Regards,
Bjorn

> +};
>
> static struct clk_regmap_mux mi2s_bit_clk = {
> .reg = 0x48,
> @@ -199,11 +207,8 @@ static struct clk_regmap_mux mi2s_bit_clk = {
> .clkr = {
> .hw.init = &(struct clk_init_data){
> .name = "mi2s_bit_clk",
> - .parent_names = (const char *[]){
> - "mi2s_bit_div_clk",
> - "mi2s_codec_clk",
> - },
> - .num_parents = 2,
> + .parent_data = lcc_mi2s_bit_div_codec_clk,
> + .num_parents = ARRAY_SIZE(lcc_mi2s_bit_div_codec_clk),
> .ops = &clk_regmap_mux_closest_ops,
> .flags = CLK_SET_RATE_PARENT,
> },
> @@ -245,8 +250,8 @@ static struct clk_rcg pcm_src = {
> .enable_mask = BIT(9),
> .hw.init = &(struct clk_init_data){
> .name = "pcm_src",
> - .parent_names = lcc_pxo_pll4,
> - .num_parents = 2,
> + .parent_data = lcc_pxo_pll4,
> + .num_parents = ARRAY_SIZE(lcc_pxo_pll4),
> .ops = &clk_rcg_ops,
> .flags = CLK_SET_RATE_GATE,
> },
> @@ -262,7 +267,9 @@ static struct clk_branch pcm_clk_out = {
> .enable_mask = BIT(11),
> .hw.init = &(struct clk_init_data){
> .name = "pcm_clk_out",
> - .parent_names = (const char *[]){ "pcm_src" },
> + .parent_hws = (const struct clk_hw*[]){
> + &pcm_src.clkr.hw,
> + },
> .num_parents = 1,
> .ops = &clk_branch_ops,
> .flags = CLK_SET_RATE_PARENT,
> @@ -270,6 +277,11 @@ static struct clk_branch pcm_clk_out = {
> },
> };
>
> +static const struct clk_parent_data lcc_pcm_clk_out_codec_clk[] = {
> + { .hw = &pcm_clk_out.clkr.hw, },
> + { .fw_name = "pcm_codec_clk", .name = "pcm_codec_clk" },
> +};
> +
> static struct clk_regmap_mux pcm_clk = {
> .reg = 0x54,
> .shift = 10,
> @@ -277,11 +289,8 @@ static struct clk_regmap_mux pcm_clk = {
> .clkr = {
> .hw.init = &(struct clk_init_data){
> .name = "pcm_clk",
> - .parent_names = (const char *[]){
> - "pcm_clk_out",
> - "pcm_codec_clk",
> - },
> - .num_parents = 2,
> + .parent_data = lcc_pcm_clk_out_codec_clk,
> + .num_parents = ARRAY_SIZE(lcc_pcm_clk_out_codec_clk),
> .ops = &clk_regmap_mux_closest_ops,
> .flags = CLK_SET_RATE_PARENT,
> },
> @@ -325,18 +334,14 @@ static struct clk_rcg spdif_src = {
> .enable_mask = BIT(9),
> .hw.init = &(struct clk_init_data){
> .name = "spdif_src",
> - .parent_names = lcc_pxo_pll4,
> - .num_parents = 2,
> + .parent_data = lcc_pxo_pll4,
> + .num_parents = ARRAY_SIZE(lcc_pxo_pll4),
> .ops = &clk_rcg_ops,
> .flags = CLK_SET_RATE_GATE,
> },
> },
> };
>
> -static const char * const lcc_spdif_parents[] = {
> - "spdif_src",
> -};
> -
> static struct clk_branch spdif_clk = {
> .halt_reg = 0xd4,
> .halt_bit = 1,
> @@ -346,7 +351,9 @@ static struct clk_branch spdif_clk = {
> .enable_mask = BIT(12),
> .hw.init = &(struct clk_init_data){
> .name = "spdif_clk",
> - .parent_names = lcc_spdif_parents,
> + .parent_hws = (const struct clk_hw*[]){
> + &spdif_src.clkr.hw,
> + },
> .num_parents = 1,
> .ops = &clk_branch_ops,
> .flags = CLK_SET_RATE_PARENT,
> @@ -384,8 +391,8 @@ static struct clk_rcg ahbix_clk = {
> .enable_mask = BIT(11),
> .hw.init = &(struct clk_init_data){
> .name = "ahbix",
> - .parent_names = lcc_pxo_pll4,
> - .num_parents = 2,
> + .parent_data = lcc_pxo_pll4,
> + .num_parents = ARRAY_SIZE(lcc_pxo_pll4),
> .ops = &clk_rcg_lcc_ops,
> },
> },
> --
> 2.36.1
>

\
 
 \ /
  Last update: 2022-07-19 06:43    [W:0.099 / U:0.784 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site