lkml.org 
[lkml]   [2022]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 5.15 39/42] scsi: pm80xx: Fix 'Unknown' max/min linkrate
Date
From: Changyuan Lyu <changyuanl@google.com>

[ Upstream commit e78276cadb669d3e55cffe66bd166ff3c8572e38 ]

Currently, the data flow of the max/min linkrate in the driver is

* in pm8001_get_lrate_mode():
hardcoded value ==> struct sas_phy

* in pm8001_bytes_dmaed():
struct pm8001_phy ==> struct sas_phy

* in pm8001_phy_control():
libsas data ==> struct pm8001_phy

Since pm8001_bytes_dmaed() follows pm8001_get_lrate_mode(), and the fields
in struct pm8001_phy are not initialized, sysfs
`/sys/class/sas_phy/phy-*/maximum_linkrate` always shows `Unknown`.

To fix the issue, change the dataflow to the following:

* in pm8001_phy_init():
initial value ==> struct pm8001_phy

* in pm8001_get_lrate_mode():
struct pm8001_phy ==> struct sas_phy

* in pm8001_phy_control():
libsas data ==> struct pm8001_phy

For negotiated linkrate, the current dataflow is:

* in pm8001_get_lrate_mode():
iomb data ==> struct asd_sas_phy ==> struct sas_phy

* in pm8001_bytes_dmaed():
struct asd_sas_phy ==> struct sas_phy

Since pm8001_bytes_dmaed() follows pm8001_get_lrate_mode(), the assignment
statements in pm8001_bytes_dmaed() are unnecessary and cleaned up.

Link: https://lore.kernel.org/r/20220707175210.528858-1-changyuanl@google.com
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Changyuan Lyu <changyuanl@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/pm8001/pm8001_hwi.c | 19 +++----------------
drivers/scsi/pm8001/pm8001_init.c | 2 ++
2 files changed, 5 insertions(+), 16 deletions(-)

diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 32fc450bf84b..031a50329182 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -3210,15 +3210,6 @@ void pm8001_bytes_dmaed(struct pm8001_hba_info *pm8001_ha, int i)
if (!phy->phy_attached)
return;

- if (sas_phy->phy) {
- struct sas_phy *sphy = sas_phy->phy;
- sphy->negotiated_linkrate = sas_phy->linkrate;
- sphy->minimum_linkrate = phy->minimum_linkrate;
- sphy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
- sphy->maximum_linkrate = phy->maximum_linkrate;
- sphy->maximum_linkrate_hw = phy->maximum_linkrate;
- }
-
if (phy->phy_type & PORT_TYPE_SAS) {
struct sas_identify_frame *id;
id = (struct sas_identify_frame *)phy->frame_rcvd;
@@ -3242,26 +3233,22 @@ void pm8001_get_lrate_mode(struct pm8001_phy *phy, u8 link_rate)
switch (link_rate) {
case PHY_SPEED_120:
phy->sas_phy.linkrate = SAS_LINK_RATE_12_0_GBPS;
- phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_12_0_GBPS;
break;
case PHY_SPEED_60:
phy->sas_phy.linkrate = SAS_LINK_RATE_6_0_GBPS;
- phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_6_0_GBPS;
break;
case PHY_SPEED_30:
phy->sas_phy.linkrate = SAS_LINK_RATE_3_0_GBPS;
- phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_3_0_GBPS;
break;
case PHY_SPEED_15:
phy->sas_phy.linkrate = SAS_LINK_RATE_1_5_GBPS;
- phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_1_5_GBPS;
break;
}
sas_phy->negotiated_linkrate = phy->sas_phy.linkrate;
- sas_phy->maximum_linkrate_hw = SAS_LINK_RATE_6_0_GBPS;
+ sas_phy->maximum_linkrate_hw = phy->maximum_linkrate;
sas_phy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
- sas_phy->maximum_linkrate = SAS_LINK_RATE_6_0_GBPS;
- sas_phy->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS;
+ sas_phy->maximum_linkrate = phy->maximum_linkrate;
+ sas_phy->minimum_linkrate = phy->minimum_linkrate;
}

/**
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index a25a34535b7a..89f6084c87ee 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -141,6 +141,8 @@ static void pm8001_phy_init(struct pm8001_hba_info *pm8001_ha, int phy_id)
struct asd_sas_phy *sas_phy = &phy->sas_phy;
phy->phy_state = PHY_LINK_DISABLE;
phy->pm8001_ha = pm8001_ha;
+ phy->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS;
+ phy->maximum_linkrate = SAS_LINK_RATE_6_0_GBPS;
sas_phy->enabled = (phy_id < pm8001_ha->chip->n_phy) ? 1 : 0;
sas_phy->class = SAS;
sas_phy->iproto = SAS_PROTOCOL_ALL;
--
2.35.1
\
 
 \ /
  Last update: 2022-07-20 03:23    [W:2.030 / U:0.868 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site