lkml.org 
[lkml]   [2022]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V16 4/6] cxl/pci: Create PCI DOE mailbox's for memory devices
In subject, s/mailbox's/mailboxes/

On Tue, Jul 19, 2022 at 01:52:47PM -0700, ira.weiny@intel.com wrote:
> From: Ira Weiny <ira.weiny@intel.com>
>
> DOE mailbox objects will be needed for various mailbox communications
> with each memory device.
>
> Iterate each DOE mailbox capability and create PCI DOE mailbox objects
> as found.
>
> It is not anticipated that this is the final resting place for the
> iteration of the DOE devices. The support of switch ports will drive
> this code into the PCIe side. In this imagined architecture the CXL
> port driver would then query into the PCI device for the DOE mailbox
> array.
>
> For now creating the mailboxes in the CXL port is good enough for the
> endpoints. Later PCIe ports will need to support this to support switch
> ports more generically.

> +static void devm_cxl_pci_create_doe(struct cxl_dev_state *cxlds)
> +{
> + struct device *dev = cxlds->dev;
> + struct pci_dev *pdev = to_pci_dev(dev);
> + u16 off = 0;
> +
> + xa_init(&cxlds->doe_mbs);
> + if (devm_add_action(&pdev->dev, cxl_pci_destroy_doe, &cxlds->doe_mbs)) {
> + dev_err(dev, "Failed to create XArray for DOE's\n");

s/DOE's/DOEs/

> + return;
> + }
> +
> + /*
> + * Mailbox creation is best effort. Higher layers must determine if
> + * the lack of a mailbox for their protocol is a device failure or not.
> + */
> + pci_doe_for_each_off(pdev, off) {
> + struct pci_doe_mb *doe_mb;
> +
> + doe_mb = pcim_doe_create_mb(pdev, off);
> + if (IS_ERR(doe_mb)) {
> + dev_err(dev, "Failed to create MB object for MB @ %x\n",

Maybe "%#x" to avoid ambiguity? Also below.

> + off);
> + continue;
> + }
> +
> + if (xa_insert(&cxlds->doe_mbs, off, doe_mb, GFP_KERNEL)) {
> + dev_err(dev, "xa_insert failed to insert MB @ %x\n",
> + off);
> + continue;
> + }
> +
> + dev_dbg(dev, "Created DOE mailbox @%x\n", off);
> + }
> +}
> +
> static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> {
> struct cxl_register_map map;
> @@ -434,6 +476,8 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
>
> cxlds->component_reg_phys = cxl_regmap_to_base(pdev, &map);
>
> + devm_cxl_pci_create_doe(cxlds);
> +
> rc = cxl_pci_setup_mailbox(cxlds);
> if (rc)
> return rc;
> --
> 2.35.3
>

\
 
 \ /
  Last update: 2022-07-20 00:17    [W:0.141 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site