lkml.org 
[lkml]   [2022]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] arm64: dts: qcom: qrb5165-rb5: Fix 'dtbs_check' error for led nodes
Date
make dtbs_check currently reports the following errors
with qrb5165-rb5 led nodes:

arch/arm64/boot/dts/qcom/qrb5165-rb5.dtb:
leds: 'bt', 'user4', 'wlan' do not match any of the regexes:
'(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'

Fix the same.

Also while at it, fix a blank line issue in the led
node.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index a7278928efc1..bf8077a1cf9a 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -58,7 +58,7 @@ hdmi_con: endpoint {
leds {
compatible = "gpio-leds";

- user4 {
+ led-user4 {
label = "green:user4";
function = LED_FUNCTION_INDICATOR;
color = <LED_COLOR_ID_GREEN>;
@@ -67,7 +67,7 @@ user4 {
default-state = "off";
};

- wlan {
+ led-wlan {
label = "yellow:wlan";
function = LED_FUNCTION_WLAN;
color = <LED_COLOR_ID_YELLOW>;
@@ -76,7 +76,7 @@ wlan {
default-state = "off";
};

- bt {
+ led-bt {
label = "blue:bt";
function = LED_FUNCTION_BLUETOOTH;
color = <LED_COLOR_ID_BLUE>;
@@ -84,7 +84,6 @@ bt {
linux,default-trigger = "bluetooth-power";
default-state = "off";
};
-
};

lt9611_1v2: lt9611-vdd12-regulator {
--
2.35.3
\
 
 \ /
  Last update: 2022-07-19 22:54    [W:0.063 / U:1.908 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site