Messages in this thread Patch in this message | | | From | Mario Limonciello <> | Subject | [PATCH v3 RESEND 4/6] hwmon: (k10temp): Add support for family 17h models A0h-AFh | Date | Tue, 19 Jul 2022 14:52:54 -0500 |
| |
Add the support for CCD offsets used on family 17h models A0h-AFh.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Guenter Roeck <linux@roeck-us.net> --- drivers/hwmon/k10temp.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c index 4e239bd75b1da..5f831e74bc51b 100644 --- a/drivers/hwmon/k10temp.c +++ b/drivers/hwmon/k10temp.c @@ -428,6 +428,10 @@ static int k10temp_probe(struct pci_dev *pdev, const struct pci_device_id *id) data->ccd_offset = 0x154; k10temp_get_ccd_support(pdev, data, 8); break; + case 0xa0 ... 0xaf: + data->ccd_offset = 0x300; + k10temp_get_ccd_support(pdev, data, 8); + break; } } else if (boot_cpu_data.x86 == 0x19) { data->temp_adjust_mask = ZEN_CUR_TEMP_RANGE_SEL_MASK; @@ -489,6 +493,7 @@ static const struct pci_device_id k10temp_id_table[] = { { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_M30H_DF_F3) }, { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_M60H_DF_F3) }, { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_M70H_DF_F3) }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_MA0H_DF_F3) }, { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_19H_DF_F3) }, { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_19H_M10H_DF_F3) }, { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_19H_M40H_DF_F3) }, -- 2.25.1
| |