lkml.org 
[lkml]   [2022]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH REBASE] regulator: core: Fix off-on-delay-us for always-on/boot-on regulators
Date
Regulators marked with "regulator-always-on" or "regulator-boot-on"
as well as an "off-on-delay-us", may run into cycling issues that are
hard to detect.

This is caused by the "last_off" state not being initialized in this
case.

Fix the "last_off" initialization by setting it to the current kernel
time upon initialization, regardless of always_on/boot_on state.

Signed-off-by: Christian Kohlschütter <christian@kohlschutter.com>
---
drivers/regulator/core.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 1e54a833f2c..398c8d6afd4 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1565,6 +1565,9 @@ static int set_machine_constraints(struct regulator_dev *rdev)
rdev->constraints->always_on = true;
}

+ if (rdev->desc->off_on_delay)
+ rdev->last_off = ktime_get();
+
/* If the constraints say the regulator should be on at this point
* and we have control then make sure it is enabled.
*/
@@ -1592,8 +1595,6 @@ static int set_machine_constraints(struct regulator_dev *rdev)

if (rdev->constraints->always_on)
rdev->use_count++;
- } else if (rdev->desc->off_on_delay) {
- rdev->last_off = ktime_get();
}

print_constraints(rdev);
--
2.36.2
\
 
 \ /
  Last update: 2022-07-19 20:51    [W:0.099 / U:0.708 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site