lkml.org 
[lkml]   [2022]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v8 0/3] Add Richtek RTQ6056 support
Date
From: ChiYuan Huang <cy_huang@richtek.com>

This patch series is to enable Richtek RTQ6056 support.

The RTQ6056 is a high accuracy current-sense monitor with I2C interface, and
the device provides full information for system by reading out the load current
and power.

Since v8
- Instead of 'integraion_time' for voltage channel, use per channel sampling
frequency to be more generic.
- Update sysfs-bus-iio.

Since v7
- Use 'DEFINE_RUNTIME_DEV_PM_OPS' to replace the explicit declaration of pm_ops.

Since v6
- Remove specific rtq6056 ABI document.
- Update integration time description in general ABI document.
- Remove the redundant blank line.
- To prevent the race condition for attribute wrtie and shunt resistor write,
use 'iio_device_claim_direct_mode' API.
- Refine the order for 'action_reset' and 'pm_runtime'.
- Fix text typo in comment like as ohm to Ohm and timea to time.

Since v5
- Fix kernel version text for ABI.

Since v4
- Add '__aligned(8)' for timestamp member.
- Declare timestamp from 'int64_t' to more unified 's64'.

Since v3
- change the node name to be generic 'adc' in binding example.
- Refine pm_runtime API calling order in 'read_channel' API.
- Fix vshunt wrong scale for divider.
- Refine the comment text.
- Use 'devm_add_action_or_reset' to decrease the code usage in probe
function.
- Use RUNTIME_PM_OPS to replace SET_RUNTIME_PM_OPS.
- minor fix for the comma.
- Use pm_ptr to replace the direct assigned pm_ops.

Since v2
- Change the resistor property name to be generic 'shunt-resistor-micro-ohms'.
- Rename file from 'rtq6056-adc' to 'rtq6056'.
- Refine the ABI, if generic already defined it, remove it and check the channel
report unit.
- Add copyright text.
- include the correct header.
- change the property parsing name.
- To use iio_chan_spec address field.
- Refine each channel separate and shared_by_all.
- Use pm_runtime and pm_runtime_autosuspend.
- Remove the shutdown callback. From the HW suggestion, it's not recommended to
use battery as the power supply.
- Check all scale unit (voltage->mV, current->mA, power->milliWatt).
- Use the read_avail to provide the interface for attribute value list.
- Add comma for the last element in the const integer array.
- Refine each ADC label text.
- In read_label callback, replace snprintf to sysfs_emit.

ChiYuan Huang (3):
dt-bindings: iio: adc: Add rtq6056 adc support
iio: adc: Add rtq6056 support
Documentation: ABI: testing: rtq6056: Update ABI docs

Documentation/ABI/testing/sysfs-bus-iio | 11 +
.../bindings/iio/adc/richtek,rtq6056.yaml | 56 ++
drivers/iio/adc/Kconfig | 15 +
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/rtq6056.c | 661 +++++++++++++++++++++
5 files changed, 744 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml
create mode 100644 drivers/iio/adc/rtq6056.c

--
2.7.4

\
 
 \ /
  Last update: 2022-07-19 16:56    [W:0.122 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site