lkml.org 
[lkml]   [2022]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 2/6] PCI: brcmstb: Split brcm_pcie_setup() into two funcs
On Mon, Jul 18, 2022 at 6:40 PM Bjorn Helgaas <helgaas@kernel.org> wrote:
>
> On Mon, Jul 18, 2022 at 02:56:03PM -0400, Jim Quinlan wrote:
> > On Mon, Jul 18, 2022 at 2:14 PM Bjorn Helgaas <helgaas@kernel.org> wrote:
> > > On Sat, Jul 16, 2022 at 06:24:49PM -0400, Jim Quinlan wrote:
> > > > Currently, the function does the setup for establishing PCIe link-up
> > > > with the downstream device, and it does the actual link-up as well.
> > > > The calling sequence is (roughly) the following in the probe:
> > > >
> > > > -> brcm_pcie_probe()
> > > > -> brcm_pcie_setup(); /* Set-up and link-up */
> > > > -> pci_host_probe(bridge);
> > > >
> > > > This commit splits the setup function in two: brcm_pcie_setup(), which only
> > > > does the set-up, and brcm_pcie_start_link(), which only does the link-up.
> > > > The reason why we are doing this is to lay a foundation for subsequent
> > > > commits so that we can turn on any power regulators, as described in the
> > > > root port's DT node, prior to doing link-up.
> > >
> > > All drivers that care about power regulators turn them on before
> > > link-up, but typically those regulators are described directly under
> > > the host bridge itself.
> >
> > Actually, what you describe is what I proposed with my v1 back in Nov 2020.
> > The binding commit message said,
> >
> > "Quite similar to the regulator bindings found in
> > "rockchip-pcie-host.txt", this allows optional regulators to be
> > attached and controlled by the PCIe RC driver."
> >
> > > IIUC the difference here is that you have regulators described under
> > > Root Ports (not the host bridge/Root Complex itself), so you don't
> > > know about them until you've enumerated the Root Ports.
> > > brcm_pcie_probe() can't turn them on directly because it doesn't know
> > > what Root Ports are present and doesn't know about regulators below
> > > them.
> >
> > The reviewer's requested me to move the regulator node(s)
> > elsewhere, and at some point later it was requested to be placed
> > under the Root Port driver. I would love to return them under the
> > host bridge, just say the word!
>
> Actually, I think my understanding is wrong. Even though the PCI core
> hasn't enumerated the Root Port as a pci_dev, brcm_pcie_setup() knows
> about it and should be able to look up the regulators and turn them
> on.


One can do this with
regulator_bulk_get(NULL, ...);

However, MarkB did not like the idea of a driver getting the regulator from
the global DT namespace [1].

For the RC driver, one cannot invoke regulator_bulk_get(dev, ...) if
there is not a
direct child regulator node. One needs to use the Port driver device.
The Port driver
device does not exist at this point unless one tries to prematurely create it;
I tried this and it was a mess to say the least.

>
> Can you dig up the previous discussion about why the regulators need
> to be under the Root Port and why they can't be turned on before
> calling pci_host_probe()?


RobH did not want the regulators to be under the RC as he said their DT
location should resemble the HW [2]. The consensus evolved
to place it under the port driver, which can provide a general
mechanism for turning
on regulators anywhere in the PCIe tree.

Regards,
Jim Quinlan
Broadcom STB

[1] https://lore.kernel.org/linux-pci/20210329162539.GG5166@sirena.org.uk/
[2] https://lore.kernel.org/linux-pci/CAL_JsqKPKk3cPO8DG3FQVSHrKnO+Zed1R=PV7n7iAC+qJKgHcw@mail.gmail.com/


>
>
> Bjorn
[unhandled content-type:application/pkcs7-signature]
\
 
 \ /
  Last update: 2022-07-19 15:58    [W:0.116 / U:0.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site