lkml.org 
[lkml]   [2022]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.18 054/231] ASoC: tas2764: Add post reset delays
Date
From: Martin Povišer <povik+lin@cutebit.org>

[ Upstream commit cd10bb89b0d57bca98eb75e0444854a1c129a14e ]

Make sure there is at least 1 ms delay from reset to first command as
is specified in the datasheet. This is a fix similar to commit
307f31452078 ("ASoC: tas2770: Insert post reset delay").

Fixes: 827ed8a0fa50 ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220630075135.2221-1-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/codecs/tas2764.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/tas2764.c b/sound/soc/codecs/tas2764.c
index 9265af41c235..edc66ff6dc49 100644
--- a/sound/soc/codecs/tas2764.c
+++ b/sound/soc/codecs/tas2764.c
@@ -42,10 +42,12 @@ static void tas2764_reset(struct tas2764_priv *tas2764)
gpiod_set_value_cansleep(tas2764->reset_gpio, 0);
msleep(20);
gpiod_set_value_cansleep(tas2764->reset_gpio, 1);
+ usleep_range(1000, 2000);
}

snd_soc_component_write(tas2764->component, TAS2764_SW_RST,
TAS2764_RST);
+ usleep_range(1000, 2000);
}

static int tas2764_set_bias_level(struct snd_soc_component *component,
@@ -107,8 +109,10 @@ static int tas2764_codec_resume(struct snd_soc_component *component)
struct tas2764_priv *tas2764 = snd_soc_component_get_drvdata(component);
int ret;

- if (tas2764->sdz_gpio)
+ if (tas2764->sdz_gpio) {
gpiod_set_value_cansleep(tas2764->sdz_gpio, 1);
+ usleep_range(1000, 2000);
+ }

ret = snd_soc_component_update_bits(component, TAS2764_PWR_CTRL,
TAS2764_PWR_CTRL_MASK,
@@ -501,8 +505,10 @@ static int tas2764_codec_probe(struct snd_soc_component *component)

tas2764->component = component;

- if (tas2764->sdz_gpio)
+ if (tas2764->sdz_gpio) {
gpiod_set_value_cansleep(tas2764->sdz_gpio, 1);
+ usleep_range(1000, 2000);
+ }

tas2764_reset(tas2764);

--
2.35.1


\
 
 \ /
  Last update: 2022-07-19 14:53    [W:1.291 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site