lkml.org 
[lkml]   [2022]   [Jul]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5 2/2] iio: adc: Add rtq6056 support
HI, Jonathan

Jonathan Cameron <jic23@kernel.org> 於 2022年7月17日 週日 凌晨1:29寫道:
>
>
> > > > > +
> > > > > +static int rtq6056_probe(struct i2c_client *i2c)
> > > > > +{
> > > > > + struct iio_dev *indio_dev;
> > > > > + struct rtq6056_priv *priv;
> > > > > + struct device *dev = &i2c->dev;
> > > > > + struct regmap *regmap;
> > > > > + unsigned int vendor_id, shunt_resistor_uohm;
> > > > > + int ret;
> > > > > +
> > > > > + if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_WORD_DATA))
> > > > > + return -EOPNOTSUPP;
> > > > > +
> > > > > + indio_dev = devm_iio_device_alloc(dev, sizeof(*priv));
> > > > > + if (!indio_dev)
> > > > > + return -ENOMEM;
> > > > > +
> > > > > + priv = iio_priv(indio_dev);
> > > > > + priv->dev = dev;
> > > > > + priv->vshuntct_us = priv->vbusct_us = 1037;
> > > > > + priv->avg_sample = 1;
> > > > > + i2c_set_clientdata(i2c, priv);
> > > > > +
> > > > > + regmap = devm_regmap_init_i2c(i2c, &rtq6056_regmap_config);
> > > > > + if (IS_ERR(regmap))
> > > > > + return dev_err_probe(dev, PTR_ERR(regmap),
> > > > > + "Failed to init regmap\n");
> > > > > +
> > > > > + priv->regmap = regmap;
> > > > > +
> > > > > + ret = regmap_read(regmap, RTQ6056_REG_MANUFACTID, &vendor_id);
> > > > > + if (ret)
> > > > > + return dev_err_probe(dev, ret,
> > > > > + "Failed to get manufacturer info\n");
> > > > > +
> > > > > + if (vendor_id != RTQ6056_VENDOR_ID)
> > > > > + return dev_err_probe(dev, -ENODEV,
> > > > > + "Invalid vendor id 0x%04x\n", vendor_id);
> > > > > +
> > > > > + ret = devm_regmap_field_bulk_alloc(dev, regmap, priv->rm_fields,
> > > > > + rtq6056_reg_fields, F_MAX_FIELDS);
> > > > > + if (ret)
> > > > > + return dev_err_probe(dev, ret, "Failed to init regmap field\n");
> > > > > +
> > > > > + /*
> > > > > + * By default, configure average sample as 1, bus and shunt conversion
> > > > > + * timea as 1037 microsecond, and operating mode to all on.
> > > > > + */
> > > > > + ret = regmap_write(regmap, RTQ6056_REG_CONFIG, RTQ6056_DEFAULT_CONFIG);
> > > > > + if (ret)
> > > > > + return dev_err_probe(dev, ret,
> > > > > + "Failed to enable continuous sensing\n");
> > > > > +
> > > > > + pm_runtime_set_autosuspend_delay(dev, MSEC_PER_SEC);
> > > > > + pm_runtime_use_autosuspend(dev);
> > > > > + pm_runtime_set_active(dev);
> > > > > + pm_runtime_mark_last_busy(dev);
> > > > > + pm_runtime_enable(dev);
> > > >
> > > > Look at whether you can use devm_pm_runtime_enable()
> > > > Note it handles disabling autosuspend for you.
> > > >
> > > > When using runtime_pm() you want to ensure that the device works without
> > > > runtime pm support being enabled. As such, you turn the device on before
> > > > enabling runtime_pm() and (this is missing I think) turn it off after disabling
> > > > runtime pm. So I'd expect a devm_add_action_or_reset() call to unwind
> > > > setting the device into continuous sending above.
> > > >
> > > If so, I think it's better to configure the device keep in off state
> > > in probe stage.
> > > The calling order may need to be changed as below
> > > devm_add_action_or_reset...
> > >
> > > pm_runtime_set_autosuspend_delay
> > > pm_runtime_use_auto_suspend
> > > devm_pm_runtime_enable
> > >
> > Ah, not correct. How about if 'PM_RUNTIME' is not enabled?
> > Do we need to consider about this case?
> >
> > If yes, the original flow about 'pm_runtime' is correct.
> I don't follow. Perhaps next version will make it clear what you mean.
>
In v6, I already fixed most about the comment in v5.
Only the 'DEFINE_RUNTIME_DEV_PM_OPS' is left.
Now all are clear.

Please review the v7. It includes all the fixes.
Thanks.
> Jonathan

\
 
 \ /
  Last update: 2022-07-18 07:44    [W:0.178 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site