Messages in this thread | | | Date | Mon, 18 Jul 2022 10:58:16 +0300 | Subject | Re: [PATCH v3 5/5] arm64: dts: qcom: sm6350: Add interconnect support | From | Georgi Djakov <> |
| |
On 25.05.22 17:44, Luca Weiss wrote: > Add all the different NoC providers that are found in SM6350 and > populate different nodes that use the interconnect properties. > > Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> > --- > Changes since v2: > * none > > arch/arm64/boot/dts/qcom/sm6350.dtsi | 109 +++++++++++++++++++++++++++ > 1 file changed, 109 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi > index fb1a0f662575..119073f19285 100644 > --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi > @@ -1,11 +1,13 @@ > // SPDX-License-Identifier: BSD-3-Clause > /* > * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> > + * Copyright (c) 2022, Luca Weiss <luca.weiss@fairphone.com> > */ > > #include <dt-bindings/clock/qcom,gcc-sm6350.h> > #include <dt-bindings/clock/qcom,rpmh.h> > #include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/interconnect/qcom,sm6350.h> > #include <dt-bindings/interrupt-controller/arm-gic.h> > #include <dt-bindings/mailbox/qcom-ipcc.h> > #include <dt-bindings/power/qcom-rpmpd.h> > @@ -539,6 +541,10 @@ i2c0: i2c@880000 { > interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, > + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, > + <&aggre1_noc MASTER_QUP_0 0 &clk_virt SLAVE_EBI_CH0 0>; > + interconnect-names = "qup-core", "qup-config", "qup-memory"; > status = "disabled"; > }; > > @@ -552,6 +558,10 @@ i2c2: i2c@888000 { > interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, > + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>, > + <&aggre1_noc MASTER_QUP_0 0 &clk_virt SLAVE_EBI_CH0 0>; > + interconnect-names = "qup-core", "qup-config", "qup-memory"; > status = "disabled"; > }; > }; > @@ -578,6 +588,10 @@ i2c6: i2c@980000 { > interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, > + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, > + <&aggre2_noc MASTER_QUP_1 0 &clk_virt SLAVE_EBI_CH0 0>; > + interconnect-names = "qup-core", "qup-config", "qup-memory"; > status = "disabled"; > }; > > @@ -591,6 +605,10 @@ i2c7: i2c@984000 { > interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, > + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, > + <&aggre2_noc MASTER_QUP_1 0 &clk_virt SLAVE_EBI_CH0 0>; > + interconnect-names = "qup-core", "qup-config", "qup-memory"; > status = "disabled"; > }; > > @@ -604,6 +622,10 @@ i2c8: i2c@988000 { > interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, > + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, > + <&aggre2_noc MASTER_QUP_1 0 &clk_virt SLAVE_EBI_CH0 0>; > + interconnect-names = "qup-core", "qup-config", "qup-memory"; > status = "disabled"; > }; > > @@ -615,6 +637,9 @@ uart9: serial@98c000 { > pinctrl-names = "default"; > pinctrl-0 = <&qup_uart9_default>; > interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; > + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, > + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>; > + interconnect-names = "qup-core", "qup-config"; > status = "disabled"; > }; > > @@ -628,11 +653,62 @@ i2c10: i2c@990000 { > interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, > + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>, > + <&aggre2_noc MASTER_QUP_1 0 &clk_virt SLAVE_EBI_CH0 0>; > + interconnect-names = "qup-core", "qup-config", "qup-memory"; > status = "disabled"; > }; > > }; > > + config_noc: interconnect@1500000 { > + compatible = "qcom,sm6350-config-noc"; > + reg = <0 0x01500000 0 0x28000>; > + #interconnect-cells = <2>; > + qcom,bcm-voters = <&apps_bcm_voter>; > + }; > + > + system_noc: interconnect@1620000 { > + compatible = "qcom,sm6350-system-noc"; > + reg = <0 0x01620000 0 0x17080>; > + #interconnect-cells = <2>; > + qcom,bcm-voters = <&apps_bcm_voter>; > + > + clk_virt: interconnect-clk-virt { > + compatible = "qcom,sm6350-clk-virt"; > + #interconnect-cells = <2>; > + qcom,bcm-voters = <&apps_bcm_voter>; > + }; > + }; > + > + aggre1_noc: interconnect@16e0000 { > + compatible = "qcom,sm6350-aggre1-noc"; > + reg = <0 0x016e0000 0 0x15080>; > + #interconnect-cells = <2>; > + qcom,bcm-voters = <&apps_bcm_voter>; > + }; > + > + aggre2_noc: interconnect@1700000 { > + compatible = "qcom,sm6350-aggre2-noc"; > + reg = <0 0x01700000 0 0x1f880>; > + #interconnect-cells = <2>; > + qcom,bcm-voters = <&apps_bcm_voter>; > + > + compute_noc: interconnect-compute-noc { > + compatible = "qcom,sm6350-compute-noc"; > + #interconnect-cells = <2>; > + qcom,bcm-voters = <&apps_bcm_voter>; > + }; > + }; > + > + mmss_noc: interconnect@1740000 { > + compatible = "qcom,sm6350-mmss-noc"; > + reg = <0 0x01740000 0 0x1c100>; > + #interconnect-cells = <2>; > + qcom,bcm-voters = <&apps_bcm_voter>; > + }; > + > ufs_mem_hc: ufs@1d84000 { > compatible = "qcom,sm6350-ufshc", "qcom,ufshc", > "jedec,ufs-2.0"; > @@ -933,6 +1009,10 @@ sdhc_2: sdhci@8804000 { > <&gcc GCC_SDCC2_APPS_CLK>, > <&rpmhcc RPMH_CXO_CLK>; > clock-names = "iface", "core", "xo"; > + interconnects = <&aggre2_noc MASTER_SDCC_2 0 &clk_virt SLAVE_EBI_CH0 0>, > + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_SDCC_2 0>; > + interconnect-names = "sdhc-ddr", "cpu-sdhc"; > + > qcom,dll-config = <0x0007642c>; > qcom,ddr-config = <0x80040868>; > power-domains = <&rpmhpd 0>; > @@ -947,11 +1027,15 @@ sdhc2_opp_table: sdhc2-opp-table { > opp-100000000 { > opp-hz = /bits/ 64 <100000000>; > required-opps = <&rpmhpd_opp_svs_l1>; > + opp-peak-kBps = <790000 131000>; > + opp-avg-kBps = <50000 50000>; > }; > > opp-202000000 { > opp-hz = /bits/ 64 <202000000>; > required-opps = <&rpmhpd_opp_nom>; > + opp-peak-kBps = <3190000 294000>; > + opp-avg-kBps = <261438 300000>;
Just wondering where do these values come from? Are they from the downstream DT? The rest looks good to me.
Thanks, Georgi
> }; > }; > }; > @@ -1017,12 +1101,33 @@ dp_phy: dp-phy@88ea200 { > }; > }; > > + dc_noc: interconnect@9160000 { > + compatible = "qcom,sm6350-dc-noc"; > + reg = <0 0x09160000 0 0x3200>; > + #interconnect-cells = <2>; > + qcom,bcm-voters = <&apps_bcm_voter>; > + }; > + > system-cache-controller@9200000 { > compatible = "qcom,sm6350-llcc"; > reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>; > reg-names = "llcc_base", "llcc_broadcast_base"; > }; > > + gem_noc: interconnect@9680000 { > + compatible = "qcom,sm6350-gem-noc"; > + reg = <0 0x09680000 0 0x3e200>; > + #interconnect-cells = <2>; > + qcom,bcm-voters = <&apps_bcm_voter>; > + }; > + > + npu_noc: interconnect@9990000 { > + compatible = "qcom,sm6350-npu-noc"; > + reg = <0 0x09990000 0 0x1600>; > + #interconnect-cells = <2>; > + qcom,bcm-voters = <&apps_bcm_voter>; > + }; > + > usb_1: usb@a6f8800 { > compatible = "qcom,sm6350-dwc3", "qcom,dwc3"; > reg = <0 0x0a6f8800 0 0x400>; > @@ -1051,6 +1156,10 @@ usb_1: usb@a6f8800 { > > resets = <&gcc GCC_USB30_PRIM_BCR>; > > + interconnects = <&aggre2_noc MASTER_USB3 0 &clk_virt SLAVE_EBI_CH0 0>, > + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>; > + interconnect-names = "usb-ddr", "apps-usb"; > + > usb_1_dwc3: usb@a600000 { > compatible = "snps,dwc3"; > reg = <0 0x0a600000 0 0xcd00>;
| |