lkml.org 
[lkml]   [2022]   [Jul]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 2/3] thermal: qcom: tsens: Add support for 'needs_reinit_wa' for sm8150
On Fri 01 Jul 09:58 CDT 2022, Bhupesh Sharma wrote:

> QCoM sm8150 tsens controller might require re-initialization

Please spell out Qualcomm.

> via trustzone [via scm call(s)] when it enters a 'bad state'
> causing sensor temperatures/interrupts status to be in an
> 'invalid' state.
>
> Add hooks for the same in the qcom tsens driver which
> can be used by followup patch(es).
>

This patch enables needs_reinit_wa, which is actually implemented in
patch 3, wouldn't it make more sense to flip them around; to first
implement the feature and then enable it in this patch?

> Cc: Amit Kucheria <amitk@kernel.org>
> Cc: Thara Gopinath <thara.gopinath@gmail.com>
> Cc: linux-pm@vger.kernel.org
> Cc: linux-arm-msm@vger.kernel.org
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---
> drivers/thermal/qcom/tsens-v2.c | 11 +++++++++++
> drivers/thermal/qcom/tsens.c | 4 ++++
> drivers/thermal/qcom/tsens.h | 6 +++++-
> 3 files changed, 20 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/thermal/qcom/tsens-v2.c b/drivers/thermal/qcom/tsens-v2.c
> index b293ed32174b..61d38a56d29a 100644
> --- a/drivers/thermal/qcom/tsens-v2.c
> +++ b/drivers/thermal/qcom/tsens-v2.c
> @@ -101,6 +101,17 @@ struct tsens_plat_data data_tsens_v2 = {
> .fields = tsens_v2_regfields,
> };
>
> +/* For sm8150 tsens, its suggested to monitor the controller health

/*
* Outside the network stack, the first line should be left empty in
* multiline comments.
*/

> + * periodically and in case an issue is detected to reinit tsens
> + * controller via trustzone.
> + */
> +struct tsens_plat_data data_tsens_sm8150 = {

I doubt this is sm8150-specific, so the first question is if this should
be attempted on all data_tsens_v2 platforms. Otherwise, how about naming
this data_tsens_v2_reinit?

Regards,
Bjorn

> + .ops = &ops_generic_v2,
> + .feat = &tsens_v2_feat,
> + .needs_reinit_wa = true,
> + .fields = tsens_v2_regfields,
> +};
> +
> /* Kept around for backward compatibility with old msm8996.dtsi */
> struct tsens_plat_data data_8996 = {
> .num_sensors = 13,
> diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
> index 7963ee33bf75..97f4d4454f20 100644
> --- a/drivers/thermal/qcom/tsens.c
> +++ b/drivers/thermal/qcom/tsens.c
> @@ -991,6 +991,9 @@ static const struct of_device_id tsens_table[] = {
> }, {
> .compatible = "qcom,msm8996-tsens",
> .data = &data_8996,
> + }, {
> + .compatible = "qcom,sm8150-tsens",
> + .data = &data_tsens_sm8150,
> }, {
> .compatible = "qcom,tsens-v1",
> .data = &data_tsens_v1,
> @@ -1135,6 +1138,7 @@ static int tsens_probe(struct platform_device *pdev)
>
> priv->dev = dev;
> priv->num_sensors = num_sensors;
> + priv->needs_reinit_wa = data->needs_reinit_wa;
> priv->ops = data->ops;
> for (i = 0; i < priv->num_sensors; i++) {
> if (data->hw_ids)
> diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
> index 1471a2c00f15..48a7bda902c1 100644
> --- a/drivers/thermal/qcom/tsens.h
> +++ b/drivers/thermal/qcom/tsens.h
> @@ -515,6 +515,7 @@ struct tsens_features {
> * @num_sensors: Number of sensors supported by platform
> * @ops: operations the tsens instance supports
> * @hw_ids: Subset of sensors ids supported by platform, if not the first n
> + * @needs_reinit_wa: tsens controller might need reinit via trustzone
> * @feat: features of the IP
> * @fields: bitfield locations
> */
> @@ -522,6 +523,7 @@ struct tsens_plat_data {
> const u32 num_sensors;
> const struct tsens_ops *ops;
> unsigned int *hw_ids;
> + bool needs_reinit_wa;
> struct tsens_features *feat;
> const struct reg_field *fields;
> };
> @@ -544,6 +546,7 @@ struct tsens_context {
> * @srot_map: pointer to SROT register address space
> * @tm_offset: deal with old device trees that don't address TM and SROT
> * address space separately
> + * @needs_reinit_wa: tsens controller might need reinit via trustzone
> * @ul_lock: lock while processing upper/lower threshold interrupts
> * @crit_lock: lock while processing critical threshold interrupts
> * @rf: array of regmap_fields used to store value of the field
> @@ -561,6 +564,7 @@ struct tsens_priv {
> struct regmap *tm_map;
> struct regmap *srot_map;
> u32 tm_offset;
> + bool needs_reinit_wa;
>
> /* lock for upper/lower threshold interrupts */
> spinlock_t ul_lock;
> @@ -593,6 +597,6 @@ extern struct tsens_plat_data data_8916, data_8939, data_8974, data_9607;
> extern struct tsens_plat_data data_tsens_v1, data_8976;
>
> /* TSENS v2 targets */
> -extern struct tsens_plat_data data_8996, data_tsens_v2;
> +extern struct tsens_plat_data data_8996, data_tsens_sm8150, data_tsens_v2;
>
> #endif /* __QCOM_TSENS_H__ */
> --
> 2.35.3
>

\
 
 \ /
  Last update: 2022-07-19 04:56    [W:0.142 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site