lkml.org 
[lkml]   [2022]   [Jul]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] ARM: dts: lan966x: Enable network driver on pcb8291
Date
The pcb8291 has 2 ports that are connected to the internal ports of the
switch. Enable them in DT.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
---
arch/arm/boot/dts/lan966x-pcb8291.dts | 35 +++++++++++++++++++++++++++
1 file changed, 35 insertions(+)

diff --git a/arch/arm/boot/dts/lan966x-pcb8291.dts b/arch/arm/boot/dts/lan966x-pcb8291.dts
index 2cb532aa33f0..d890e6fcdbae 100644
--- a/arch/arm/boot/dts/lan966x-pcb8291.dts
+++ b/arch/arm/boot/dts/lan966x-pcb8291.dts
@@ -4,6 +4,7 @@
*/
/dts-v1/;
#include "lan966x.dtsi"
+#include "dt-bindings/phy/phy-lan966x-serdes.h"

/ {
model = "Microchip EVB - LAN9662";
@@ -32,6 +33,40 @@ fc3_b_pins: fc3-b-pins {
};
};

+&mdio1 {
+ status = "okay";
+};
+
+&phy0 {
+ status = "okay";
+};
+
+&phy1 {
+ status = "okay";
+};
+
+&switch {
+ status = "okay";
+};
+
+&serdes {
+ status = "okay";
+};
+
+&port0 {
+ status = "okay";
+ phy-handle = <&phy0>;
+ phy-mode = "gmii";
+ phys = <&serdes 0 CU(0)>;
+};
+
+&port1 {
+ status = "okay";
+ phy-handle = <&phy1>;
+ phy-mode = "gmii";
+ phys = <&serdes 1 CU(1)>;
+};
+
&flx3 {
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
status = "okay";
--
2.33.0
\
 
 \ /
  Last update: 2022-07-18 23:26    [W:0.075 / U:1.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site