lkml.org 
[lkml]   [2022]   [Jul]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/2] power: domain: handle power supplies that need interrupts
Date
If the power-domains' power-supply node (regulator) needs
interrupts to work, the current setup with noirq callbacks cannot
work; for example a pmic regulator on i2c, when suspending, usually already
times out during suspend_noirq:

[ 41.024193] buck4: failed to disable: -ETIMEDOUT

So fix system suspend and resume for these power-domains by using the
"outer" suspend/resume callbacks instead. Tested on the imx8mq-librem5 board,
but by looking at the dts, this will fix imx8mq-evk and possibly other boards
too.

Possibly one can find more changes than suspend/resume for this case. They
can be added later when testing them: This is designed so that genpd
providers just say "this power-supply" needs interrupts - without implying
what exactly should be configured in genpd.

Initially system suspend problems had been discussed at
https://lore.kernel.org/linux-arm-kernel/20211002005954.1367653-8-l.stach@pengutronix.de/
which led to discussing the pmic that contains the regulators which
serve as power-domain power-supplies:
https://lore.kernel.org/linux-pm/573166b75e524517782471c2b7f96e03fd93d175.camel@puri.sm/T/

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---

revision history
----------------
v3: (thank you Ulf)
* move DT parsing to gpcv2 and create a genpd flag that gets set

v2: (thank you Krzysztof)
* rewrite: find possible regulators' interrupts property in parents
instead of inventing a new property.
https://lore.kernel.org/linux-arm-kernel/20220712121832.3659769-1-martin.kepplinger@puri.sm/

v1: (initial idea)
https://lore.kernel.org/linux-arm-kernel/20220711094549.3445566-1-martin.kepplinger@puri.sm/T/#t


drivers/base/power/domain.c | 19 +++++++++++++++++++
drivers/soc/imx/gpcv2.c | 9 +++++++++
include/linux/pm_domain.h | 6 ++++++
3 files changed, 34 insertions(+)

diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
index 739e52cd4aba..1437476c9086 100644
--- a/drivers/base/power/domain.c
+++ b/drivers/base/power/domain.c
@@ -130,6 +130,7 @@ static const struct genpd_lock_ops genpd_spin_ops = {
#define genpd_is_active_wakeup(genpd) (genpd->flags & GENPD_FLAG_ACTIVE_WAKEUP)
#define genpd_is_cpu_domain(genpd) (genpd->flags & GENPD_FLAG_CPU_DOMAIN)
#define genpd_is_rpm_always_on(genpd) (genpd->flags & GENPD_FLAG_RPM_ALWAYS_ON)
+#define genpd_ps_needs_irq(genpd) (genpd->flags & GENPD_FLAG_IRQ_POWER_SUPPLY)

static inline bool irq_safe_dev_in_sleep_domain(struct device *dev,
const struct generic_pm_domain *genpd)
@@ -2298,6 +2299,20 @@ static bool genpd_present(const struct generic_pm_domain *genpd)
return ret;
}

+/**
+ * of_genpd_get_power_supply_irq() - Adjust if power-supply needs interrupts
+ * @genpd: Pointer to PM domain associated with the PM domain provider.
+ */
+static void of_genpd_config_power_supply_irq(struct generic_pm_domain *pd)
+{
+ if (genpd_ps_needs_irq(pd)) {
+ pd->domain.ops.suspend = genpd_suspend_noirq;
+ pd->domain.ops.resume = genpd_resume_noirq;
+ pd->domain.ops.suspend_noirq = NULL;
+ pd->domain.ops.resume_noirq = NULL;
+ }
+}
+
/**
* of_genpd_add_provider_simple() - Register a simple PM domain provider
* @np: Device node pointer associated with the PM domain provider.
@@ -2343,6 +2358,8 @@ int of_genpd_add_provider_simple(struct device_node *np,
genpd->provider = &np->fwnode;
genpd->has_provider = true;

+ of_genpd_config_power_supply_irq(genpd);
+
return 0;
}
EXPORT_SYMBOL_GPL(of_genpd_add_provider_simple);
@@ -2394,6 +2411,8 @@ int of_genpd_add_provider_onecell(struct device_node *np,

genpd->provider = &np->fwnode;
genpd->has_provider = true;
+
+ of_genpd_config_power_supply_irq(genpd);
}

ret = genpd_add_provider(np, data->xlate, data);
diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c
index 85aa86e1338a..3a22bad07534 100644
--- a/drivers/soc/imx/gpcv2.c
+++ b/drivers/soc/imx/gpcv2.c
@@ -1303,6 +1303,7 @@ static const struct imx_pgc_domain_data imx8mn_pgc_domain_data = {
static int imx_pgc_domain_probe(struct platform_device *pdev)
{
struct imx_pgc_domain *domain = pdev->dev.platform_data;
+ struct device_node *dn;
int ret;

domain->dev = &pdev->dev;
@@ -1333,6 +1334,14 @@ static int imx_pgc_domain_probe(struct platform_device *pdev)
regmap_update_bits(domain->regmap, domain->regs->map,
domain->bits.map, domain->bits.map);

+ dn = of_parse_phandle(domain->dev->of_node, "power-supply", 0);
+ if (dn) {
+ while ((dn = of_get_next_parent(dn))) {
+ if (of_get_property(dn, "interrupts", NULL))
+ domain->genpd.flags |= GENPD_FLAG_IRQ_POWER_SUPPLY;
+ }
+ }
+
ret = pm_genpd_init(&domain->genpd, NULL, true);
if (ret) {
dev_err(domain->dev, "Failed to init power domain\n");
diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h
index ebc351698090..bcceaf376f36 100644
--- a/include/linux/pm_domain.h
+++ b/include/linux/pm_domain.h
@@ -60,6 +60,11 @@
* GENPD_FLAG_MIN_RESIDENCY: Enable the genpd governor to consider its
* components' next wakeup when determining the
* optimal idle state.
+ *
+ * GENPD_FLAG_IRQ_POWER_SUPPLY: The power-domains' power-supply (regulator)
+ * needs interrupts to work. Adjust accordingly.
+ * Use the outer suspend/resume callbacks instead
+ * of noirq for example.
*/
#define GENPD_FLAG_PM_CLK (1U << 0)
#define GENPD_FLAG_IRQ_SAFE (1U << 1)
@@ -68,6 +73,7 @@
#define GENPD_FLAG_CPU_DOMAIN (1U << 4)
#define GENPD_FLAG_RPM_ALWAYS_ON (1U << 5)
#define GENPD_FLAG_MIN_RESIDENCY (1U << 6)
+#define GENPD_FLAG_IRQ_POWER_SUPPLY (1U << 7)

enum gpd_status {
GENPD_STATE_ON = 0, /* PM domain is on */
--
2.30.2
\
 
 \ /
  Last update: 2022-07-18 23:04    [W:0.087 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site