lkml.org 
[lkml]   [2022]   [Jul]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 2/2] Documentation/gpu: Add GFXOFF section
Applied the series with some minor tweaks to the documentation.

Thanks!

Alex

On Thu, Jul 14, 2022 at 3:18 PM André Almeida <andrealmeid@igalia.com> wrote:
>
> Add a GFXOFF section at "GPU Power Controls" file, explaining what it is
> and how userspace can interact with it.
>
> Signed-off-by: André Almeida <andrealmeid@igalia.com>
> ---
> Changes from v1: file created
>
> Documentation/gpu/amdgpu/thermal.rst | 41 ++++++++++++++++++++++++++++
> 1 file changed, 41 insertions(+)
>
> diff --git a/Documentation/gpu/amdgpu/thermal.rst b/Documentation/gpu/amdgpu/thermal.rst
> index 8aeb0186c9ef..14c0fb874cf6 100644
> --- a/Documentation/gpu/amdgpu/thermal.rst
> +++ b/Documentation/gpu/amdgpu/thermal.rst
> @@ -63,3 +63,44 @@ gpu_metrics
>
> .. kernel-doc:: drivers/gpu/drm/amd/pm/amdgpu_pm.c
> :doc: gpu_metrics
> +
> +GFXOFF
> +======
> +
> +GFXOFF is a feature found in some mobile GPUs that saves power consumption. The
> +card's firmware uses RLC (RunList Controller) to power off the gfx engine
> +dynamically when there is no workload on gfx pipe and puts gfx into "idle"
> +state. GFXOFF is on by default on supported GPUs.
> +
> +Userspace can interact with GFXOFF through a debugfs interface:
> +
> +``amdgpu_gfxoff``
> +-----------------
> +
> +Use it to enable/disable GFXOFF, and to check if it's current enabled/disabled::
> +
> + $ xxd -l1 -p /sys/kernel/debug/dri/0/amdgpu_gfxoff
> + 01
> +
> +- Write 0 to disable it, and 1 to enable it.
> +- Read 0 means it's disabled, 1 it's enabled.
> +
> +If it's enabled, that means that the GPU is free to enter into GFXOFF mode as
> +needed. Disabled means that it will never enter GFXOFF mode.
> +
> +``amdgpu_gfxoff_status``
> +------------------------
> +
> +Read it to check current GFXOFF's status of a GPU::
> +
> + $ xxd -l1 -p /sys/kernel/debug/dri/0/amdgpu_gfxoff_status
> + 02
> +
> +- 0: GPU is in GFXOFF state, the gfx engine is powered down.
> +- 1: Transition out of GFXOFF state
> +- 2: Not in GFXOFF state
> +- 3: Transition into GFXOFF state
> +
> +If GFXOFF is enabled, the value will be transitioning around [0, 3], always
> +getting into 0 when possible. When it's disabled, it's always at 2. Returns
> +``-EINVAL`` if it's not supported.
> --
> 2.37.0
>

\
 
 \ /
  Last update: 2022-07-18 21:27    [W:0.067 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site