lkml.org 
[lkml]   [2022]   [Jul]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 11/13] leds: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
Hi!

> The MediaTek MT6370 is a highly-integrated smart power management IC,
> which includes a single cell Li-Ion/Li-Polymer switching battery
> charger, a USB Type-C & Power Delivery (PD) controller, dual
> Flash LED current sources, a RGB LED driver, a backlight WLED driver,
> a display bias driver and a general LDO for portable devices.
>
> In MediaTek MT6370, there are four channel current-sink RGB LEDs that
> support hardware pattern for constant current, PWM, and breath mode.
> Isink4 channel can also be used as a CHG_VIN power good indicator.
>
> Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>

> index a49979f..71bacb5 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -244,6 +244,20 @@ config LEDS_MT6323
> This option enables support for on-chip LED drivers found on
> Mediatek MT6323 PMIC.
>
> +config LEDS_MT6370_RGB
> + tristate "LED Support for MediaTek MT6370 PMIC"
> + depends on LEDS_CLASS
> + depends on MFD_MT6370
> + select LINEAR_RANGE
> + help
> + Say Y here to enable support for MT6370_RGB LED device.
> + In MT6370, there are four channel current-sink LED drivers that
> + support hardware pattern for constant current, PWM, and breath mode.
> + Isink4 channel can also be used as a CHG_VIN power good

Should this go to leds/rgb directory, and should it depend on
multicolor framework?

Best regards,
Pavel
--
People of Russia, stop Putin before his war on Ukraine escalates.
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2022-07-17 10:47    [W:0.191 / U:1.524 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site